Stainless Steel Crimp Tester, Display Type : Digital

Listing ID #4180577

The crimp in a yarn is defined as the mean difference between the actual length of any yarn and its apparent length in the fabric after weaving . It is usually expressed as a percentage of the apparent length of the yarn in the fabric .

Determination of the crimp of yarn is carried out by marking a known length on the fabric, removing the market yarn in such a manner that it does not loose its twist, holding it between two grips at the marked points, and slowly extending it till it is subjected to a specified straightening tension . The increase in length of the yarn is determined and expressed as a percentage of marked length to obtain the value of crimp.

IKON Crimp Tester is designed to determine the crimp of yarns taken out of fabrics . One end of the yarn is held in a pivoted loading grip on which the desired tension load is applied by means of a sliding weight acting on a lever arm, while the other end is held in a movable grip which is mounted on a screw and can move along the direction of the yarn, stretching it in the process . The distance moved through by this grip gives the extension of the yarn , and can be measured on a scale fixed by the side of the grip assembly .

The loading grip is pivoted on jewel bearing and mounted on a sliding platform which can be moved towards or away from the moving grip to enable different marked lengths of yarn to be tested . The test length is indicated on a scale fixed on the base of the apparatus against a pointer fixed to the sliding platform .

The yarns is held in between the two grips and pulled by moving the movable grip away from the loading grip . The tension under which the crimp is to be determined is set on the pendulum by moving the sliding weight and is indicated on a load scale . When the yarn is under the specified tension , the pendulum lifts off its support , thus breaking a contact and turning off a low voltage indicator light . The elongation of the yarn when the light just goes off is noted , from which the value of percentage crimp can be calculated .

The apparatus is finished in grey hammer tone stoving painting and bright chrome plating to give it a corrosion resistant finish .

Technical Data

• Maximum test length : 400 mm
• Maximum elongation : 125 mm
• Tension load : 3 g to 20 g

 Relevant Standard