Products / Services
  • Products / Services
  • Companies
  • Buy Leads
    Post Buy Requirement

    NORMAL BITUMEN EMULSION 50

    • Supply TypeManufacturer, Exporter, Supplier
    • Preferred Buyer Location All over the world

    DESCRIPTION  It is a non-fiberated, Anionic water based bitumen Emulsion. It is dark brown in colour and dries to a black flexible protective coating. The finish film is tough and water proof and....
    View More Details
    Send Enquiry

    Company Information

    • calendar Member Since 11 Years
    • building Nature of Business Supplier

    Ask for more detail from the seller

    Contact Supplier
    Report incorrect details

    Product Details no_img_icon

    DESCRIPTION 


    It is a non-fiberated, Anionic water based bitumen Emulsion. It is dark brown in colour and dries to a black flexible protective coating. The finish film is tough and water proof and forms a barrier to water and vapor transmission. 

    ADVANTAGES 

    Cold applied

    Easy to apply 

    Chemical resistance

    Economical in use

    Multi purpose, serves both as a protective Coating and curing membrane

    Adhere to wide range of materials including Concrete, steel, cork and wood

     
    USES 
    UIB PROOF - NBE 50 is used as a general water proofer and damp proofing for all kinds of surfaces including concrete, brick etc. Also can be used as a vapor barrier coating. Protects fresh concrete from rapid evaporation of water and thus avoids formation of shrinkage cracks. 
    Metal protection; provide a vapor barrier for cold storage rooms etc. 

    APPLICATION 
    Note: Agitate before use. As settlement can occur, the drum should be rolled before decanting materials. 

     

    Surfaces to be coated must be clean and any sand, oil or grease contamination should be removed. The surface should be dry (or damp but not wet). If the surface is dusty, it should be primed with a coat of UIB PROOF - NBE 50 diluted with an equal quantity of cold clean water and allowed to dry. 
    UIB PROOF - NBE 50 can be applied by brush or spray equipment. One coat is sufficient when used as a curing compound for "Green" concrete. Two coats are needed when being used as a damp-proofing membrane. 
    It is recommended that one or two coats should be applied depending on the degree of the protection required. Allow a minimum 2 hours between coats. Apply a second coat at right angels and ensuring this is not less than 0.5 mm thickness. Drying time 1.5 hours @ 20 degrees Celsius and over coating time 2 hours minimum. The specific Gravity of the product is approximately 1.05 
    STANDARD   
    UIB PROOF - NBE 50 Complies with concrete curing requirements of ASTM c 309-93 when applied at the rate of 2 square meters per Liter. 
    STORAGE 
    UIB PROOF - NBE 50 has a shelf life of 12 months if stored in the shade below 45 degrees Celsius, under normal warehouse conditions. 
    CLEANING OF TOOLS  

    In water if wet. If dry, clean with kerosene or white spirit. 
    PACKING  
    20 Ltr Pails Code No: 03021011
    200 Ltr. Drums Code No: 03021012

     



    Share your requirements for a quick response!
    Tell us what you need?

    Looking for NORMAL BITUMEN EMULSION 50?

    Quantity
    Seller Contact Details
    To list your productBoost Your Business Visibility WorldwideRegister Now
    To list your productBoost Your Business Visibility WorldwideRegister Now
    Waiting for permission
    To search by voice, go to your browser settings and allow access to microphone

    Allow microphone access to search with voice