Listing ID #7311552
Company Information
Ask for more detail from the seller
Contact Supplier
NST-5-INCH CLOSE-RANGE ROTARY EVAPORATION COATING FURNACE is a rapid thermal processing furnace with 11″ I.D. quartz chamber. It is designed for Thermal Evaporating or CSS (Close Spaced Sublimation) film coating up to 5″ Dia. circular samples and 800°C Max. The furnace is heated by two group of halogen heaters (Top and Bottom) separately with max. 10℃/s heating rate. Two 30 segment precision temperature controllers are built in with +/-1ºC accuracy. RS485 port and control software are included to allow for the operation of furnace and temperature profile logging via PC. It is an excellent tool to research new generation thin film for solar cells, such as CdTe, Sulfide, and Perovskite solar cell.
| Furnace structure & Vacuum Chamber | Two temperature controllers. The chamber is made of high purity fused quartz tube. Quartz tube size: 11″ OD/10.8″ ID×9″ H The vacuum flanges are made of Stainless Steel 316. |
|---|---|
| Vacuum Flanges | Top Flange with one KFD-25 vacuum port and one gas outlet(1/4″ pipe required) can slide up or down manually to load and unload substrate and evaporated material easily. Bottom flange has one KFD-25 vacuum port with one gas inlet (1/4″ pipe required) with needle valves. The flange is sealed by double silicone o-rings and can achieve max. the vacuum pressure of 10E-2 Torr by a quality mechanical pump and 10E-5 Torr by a molecular pump (vacuum pump is not included, please order separately). One digital vacuum gauge is installed on the top flange. Precision anti-corrosion digital vacuum gauge is in standard package. |
| Gas Flow Control | Gas mixer integrated with two float-meters with adjustable measurement ranges of 16 -160 mL/m |
| Heater and Sample Holder | Two independently controlled heaters with a manually adjustable gap from 2-30 mm. 20 pcs Halogen lamps are used as the heating element for rapid thermal processing. Heaters are is made of stainless steel with water cold jacket to reduce heat radiation and allow for fast cooling. 5″ Dia. the circular wafer holder is built into the top heater for holding the substrate. One set of high thermal-conductive AlN plates or graphite plate (5″ Dia.×0.5mm Thick) is included (place on the bottom for evaporating material ) A 58L/min circulating water chiller is included for saving water source |
| Temperature Controller | Two precision digital temperature controllers with 30 segments programmable offer independent control of the top and bottom heaters. Each controller has PID autotune function to protect heaters from overshooting and an alarm function to avoid overheating and a thermal couple are broken. PC communication interface & software is installed for recording temperature profile. |
| Working Temperature | Maximum temperature for each heater: <= 800℃. Maximum temperature difference between two heaters: <= 300℃ depends on the spacing between two heaters: Spacing 30mm Max. temp difference: 315℃ heating bottom only |
| Heating & Cooling Rate | Heating: < 8℃/s ( heating single heater only ) Cooling: < 10℃/s (600 – 100℃) Max. |
| Thermal Couple | Two K-type thermal couples are installed on top and bottom heaters separately. |
| Working Voltage | 220VAC, Single Phase, 60A Air Breaker required |
| Power Requirement | 9.5KW total |
| Dimensions | 1085mm L×680mm W×1710mm H |
| Warranty | One year limited with lifetime support (Consumable parts such as quartz tube and heating lamps are not covered by the warranty). |
Nano Science and Technology Company, founded by Mr Peeyush Dixit in 2013, has been a pioneer as a supplier and importer of multiple electronic and industrial uses chemicals in Gautam Buddha Nagar, Uttar Pradesh India. With a committed commitment to advantage and a customer-centric approach, we have established ourselves as a dependable name in both domestic and corporate sectors.
We recognize the importance of a clean and organized environment, be it at home or in the workplace. Our products are tailored to meet the exclusive requirements of each client, certifying the successful completion of all customer purposes. Whether it\'s Sputtering Systems, or Education and Research & Development areas, our team of skilled specialists is devoted to delivering top-notch results with efficiency and reliability.
Â
Vision: Our products must fulfill all the industrial requirements also, renowned for our commitment to excellence, innovation, and sustainability.
Â
Our service range
We are prominently providing reliable products like Muffle Furnaces, Vacuum Oven, Turbo Molecular Pump Station, Oxygen Plasma Cleaner, Lab Thin Film Coating System, Plasma Sputtering Coater, Thermal Evaporation Coater, Precision Temperature Controlled Hi-Vacuum Thermal Evaporating Coater etc.
Â
Why us?
Providing reliable and trustworthy products
Equipped with highly knowledgeable staff
Having multiple ranges of products
Transparent pricing structure
Providing online support as well
Nature of Business
Manufacturer / Exporter / Supplier
Number of Employees
20 - 50
Year of Establishment
2013
Acmetech
Connect with us
For Buyer 
For Seller 
Help 
