Oval PET Motion Detector

Internal Battery:  3V Lithium battery, type CR-123A. For UL installations, use Panasonic or Sanyo only.

Transmit Current Drain: 20 mA (including LED).

Battery Life (with LED on):  Typically over 3 years.

True Motion Event Verification:  2 position selector - 1 (OFF) or 2 (ON) motion events.

Alarm Period:  3 seconds.

Rearm Timer:  Rearms the detector 2 minutes after the last alarm. 
Timer disabled in the walk test mode – not applicable for the DD243 version (see section 1).

Transmission Sequence:  3 data bursts at variable intervals within 3 seconds.

 Encoding:  24-bit ID, over 16 million possible combinations. Total.

Message Length: 36 bits.

Tamper Alert:  Reported when a tamper event occurs and in any subsequent message, until the tamper switch is restored.

Supervision Message:  Signaling at 60 minutes interval (U.S. version)
 15 minute interval (UK version) or according to local standards.

Height: 1.8 - 2.4 m (6 - 8 ft). Recommended height up to 2.1 m (7 ft)
Installation Options:  Surface or corner

BR-1: Surface mounted swivel bracket, adjustable 30° down and 45° left/45° right, BR-1 with a corner adapter, BR-1 with a ceiling adapter

RFI Protection: >20 V/m up to 1000 MHz.

Operating Temperatures: -10°C to 50°C (14°F to 122°F).

Storage Temperatures: -20°C to 60°C (-4°F to 140°F).

Compliance with Standards: Designed to meet FCC Part 15 and Directive 1999/5/EC of the European Parliament.

Dimensions (H x W x D):  94.5 x 63.5 x 53.0 mm (3-11/16 x 2-1/2 x 2-1/16”).