Paintco Acrylic Emulsion Semi Gloss 7239

DESCRIPTION .Paintco Acrylic Emulsion Semi Gloss is scuff proof, washable and nonsaponifiable paint based on hard copolymer.Semi gloss appearance without the lingering smell of white spirit, non yellowing characteristic to prevent change in shade after ageing and eco-friendly nature lead to preferential selection of this product over conventional alkyd based products. It is ideally suitable for interior and exterior uses.In addition to cement and concrete this product is also suitable for wooden surfaces.PHYSICAL DATA.Pigment:Rutile Titanium dioxide and /or colour
pigments and functional extenders.Appearance:Semi gloss.Colours :White and colours(see our color card or NCS colors.No. of components:One.Specific gravity:Approx. 1.15.Solids by volume:Approx. 25%.Drying time at 30°C:1-Dust dry:approx.30 minutes.2-Hard dry:approx.4 hours.3-Recoatability:after 4 hours.Flash point:Nonflammable.APPLICATION DATA.
Application method:Air spray, brush and roller.Type of thinner:Water.Percentage of thinner:Air spray : 10-15% max. by volume.Brush & roller: 5% Max. by volume.Dry film thickness per coat :25microns.Ther.coverage at 25 mic. DFT:10 m2 / litre.Surface Preparation : All surfaces must be thoroughly prepared and clean and should be free from alkali and efforescence, for repair and maintenance, remove damaged and loose paint by mechanical cleaning and dust off. Priming coats:-Apply Paintco Latex Primer Sealer 1201. or Alkali Resistant Primer 1507. followed by Paintco Magna Wall Filler 10000. for Interior or Paintco Magna Spray Plaster Putty 20000. for exterior.
Acrylic Emulsion semi gloss is extraordinary good for stain and burnish resistance.