Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Mobile Pump Controller with starter

Listing ID #4663776

  • TypePanel.
  • MountingSurface mounting.
  • OV (RED)Over Voltage Fault.
  • Working Temp0 to 55 ° C
  • Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer From : All over the world
View More Details
Send Enquiry

Company Information

  • Member Since 10 Years
  • Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

  • Type Panel.
  • Terminal Screw ON Terminals.
  • Input Current 0-18 A per phase.
  • Working Temp 0 to 55 ° C
  • Relay (Green) Supply Healthy (No fault)
  • Relative humidity 0 95 % non-condensive
  • Mounting Surface mounting.
  • UV (RED) Under Voltage Fault.
  • Warm up time 30 Sec
  • UL/CUB (RED) Under Load & Current Unbalance Fault.
  • Storage Temp 10 to 70 °C
  • Input Supply 3 Phase 415 V, 50 HZ AC (3 Phase 3 wire)
  • OV (RED) Over Voltage Fault.
  • OL (RED) Over Load Fault.
  • Auxiliary Power No External power is required (Draws power from the Voltage Inputs)
  • Output contact Rating 18 A at 415 volt Contactor. , 7 A at 250 volt.
  • SPP/UB/RP (RED) SPP, Voltage Unbalance& Reverse Phase Fault.
  • Enclosure 275(W) X 185 (H) X 116(D) mm.


This wireless GSM remote controller helps the farmer to control agricultural pump sets easily. It also helps the farmer to irrigate the crops in proper schedule. Farmer can set the total running time of pumpset to be run. This saves water, time and electricity. GSM motor starter is a must device for farmers in today's world. This mobile starter protects the motor from low voltage,over voltage,dry Run,over Load.Some features are: Local language support, single phase preventer, auto starter ,etc. 
Primary cause of motor failure is excessive heating, which is sustained over long time periods will result in motor burn out. Overheating also reduces the life of motor. If a motor is continuously overheated by just 10 degrees, its life can get reduced by almost 50%. Overheating normally occurs due to Over Current, which in turn may be due to over load condition or low voltage or phase failure or phase unbalance. Current unbalance in motor is best represented by the presence of excessive negative sequence components in the motor current. Consequently it is necessary to protect motors against negative sequence. Considering the above details, it can be easily concluded that a Motor Protection Unit (MPU) will provide an effective protection to the motor as it is equipped to measure the negative sequence component level in the motor feeder.

 

  • Fully programmable
  • Suitable for three phase pumps up to 7.5HP.
  • No auxiliary power supply required for controller operation. .
  • Complete protection from electrical unhealthy condition.
  • All parameters are settable through front key.
  • LED indications for alarm (fault).
  • Scrolling display of parameters, one by one in scroll mode.
  • Four bright 7 segment display on unit.
  • Inverse Time trip curve for over load fault.


Interested in this product? Ask for more details & Latest Price from seller
Send Enquiry
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for Mobile Pump Controller with starter?

Quantity
Seller Contact Details
  • Seller Proton Power Control Pvt Ltd
  • Address Pimple Nilakh, Pune, Maharashtra
Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice
Mobile Pump Controller with starter at Best Price in Pune - ID: 4663776
Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Mobile Pump Controller with starter

Listing ID #4663776

  • TypePanel.
  • Auxiliary PowerNo External power is required (Draws power from the Voltage Inputs)
  • OL (RED)Over Load Fault.
  • Relay (Green)Supply Healthy (No fault)
  • Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer From : All over the world
View More Details
Send Enquiry

Company Information

  • Member Since 10 Years
  • Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

  • Type Panel.
  • UL/CUB (RED) Under Load & Current Unbalance Fault.
  • Mounting Surface mounting.
  • Relay (Green) Supply Healthy (No fault)
  • Input Supply 3 Phase 415 V, 50 HZ AC (3 Phase 3 wire)
  • Relative humidity 0 95 % non-condensive
  • OL (RED) Over Load Fault.
  • OV (RED) Over Voltage Fault.
  • Working Temp 0 to 55 ° C
  • Warm up time 30 Sec
  • Storage Temp 10 to 70 °C
  • Enclosure 275(W) X 185 (H) X 116(D) mm.
  • Auxiliary Power No External power is required (Draws power from the Voltage Inputs)
  • Input Current 0-18 A per phase.
  • UV (RED) Under Voltage Fault.
  • SPP/UB/RP (RED) SPP, Voltage Unbalance& Reverse Phase Fault.
  • Terminal Screw ON Terminals.
  • Output contact Rating 18 A at 415 volt Contactor. , 7 A at 250 volt.


This wireless GSM remote controller helps the farmer to control agricultural pump sets easily. It also helps the farmer to irrigate the crops in proper schedule. Farmer can set the total running time of pumpset to be run. This saves water, time and electricity. GSM motor starter is a must device for farmers in today's world. This mobile starter protects the motor from low voltage,over voltage,dry Run,over Load.Some features are: Local language support, single phase preventer, auto starter ,etc. 
Primary cause of motor failure is excessive heating, which is sustained over long time periods will result in motor burn out. Overheating also reduces the life of motor. If a motor is continuously overheated by just 10 degrees, its life can get reduced by almost 50%. Overheating normally occurs due to Over Current, which in turn may be due to over load condition or low voltage or phase failure or phase unbalance. Current unbalance in motor is best represented by the presence of excessive negative sequence components in the motor current. Consequently it is necessary to protect motors against negative sequence. Considering the above details, it can be easily concluded that a Motor Protection Unit (MPU) will provide an effective protection to the motor as it is equipped to measure the negative sequence component level in the motor feeder.

 

  • Fully programmable
  • Suitable for three phase pumps up to 7.5HP.
  • No auxiliary power supply required for controller operation. .
  • Complete protection from electrical unhealthy condition.
  • All parameters are settable through front key.
  • LED indications for alarm (fault).
  • Scrolling display of parameters, one by one in scroll mode.
  • Four bright 7 segment display on unit.
  • Inverse Time trip curve for over load fault.


Interested in this product? Ask for more details & Latest Price from seller
Send Enquiry
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for Mobile Pump Controller with starter?

Quantity
Seller Contact Details
  • Seller Proton Power Control Pvt Ltd
  • Address Pimple Nilakh, Pune, Maharashtra
Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice