We are offering pib masterbatch pt60.
polyfill’ pt-60-pib masterbatch is a average molecular poly isobutylene based masterbatch based on polyolefins, used in lldpe ldpe self adhesive stretch film, cling film, & wrap film (either blown film or cast film) and it is available in-granule-form.
pib master batch pt60 is very easy to handle as against the direct dosing of pib liquid which is very difficult & tedious to handle due to high viscosity. Our pib master batch distributes very uniformly over the entire film imparting the strength & tackiness properties to the film with self adhesive properties. And this property of the film helps to bind the packages together with proper grip. In multi-layer films, pib master batch ,is used only in one layer , the upper layer and the adding ratio is determined by the film thickness and on the layer to be used.
addition-levels
cling films made from our pib master batch are most economical and the quality of the film coverage increases on stretching. The loading of pib master batch varies from 3% to 8% depending upon the type of the film plant (blown or cast-line)--installed.
we suggest the following addition level based on the test results from outdoor weathering tests and from practical experience :
blownfilm—application 3----5%
castfilm—application 1----2%
the above dosages are for guidance only. Actual condition may vary from film to film, process to process and also upon the thickness of the film and its specific-uses.
material--mixing
to get the best results in case of extrusion, it is advisable to mix the material thoroughly before feeding in a hopper.
applications
stretch—cling---wrap----film
storage
there should be no problems in storing of pt-60-pib. The storage life is six months of pt-60-pib at 25c, although not very sensitive to heat and humidity , proper storage will prolong the storage life of the product.

We are offering pib masterbatch pt60.
polyfill’ pt-60-pib masterbatch is a average molecular poly isobutylene based masterbatch based on polyolefins, used in lldpe ldpe self adhesive stretch film, cling film, & wrap film (either blown film or cast film) and it is available in-granule-form.
pib master batch pt60 is very easy to handle as against the direct dosing of pib liquid which is very difficult & tedious to handle due to high viscosity. Our pib master batch distributes very uniformly over the entire film imparting the strength & tackiness properties to the film with self adhesive properties. And this property of the film helps to bind the packages together with proper grip. In multi-layer films, pib master batch ,is used only in one layer , the upper layer and the adding ratio is determined by the film thickness and on the layer to be used.
addition-levels
cling films made from our pib master batch are most economical and the quality of the film coverage increases on stretching. The loading of pib master batch varies from 3% to 8% depending upon the type of the film plant (blown or cast-line)--installed.
we suggest the following addition level based on the test results from outdoor weathering tests and from practical experience :
blownfilm—application 3----5%
castfilm—application 1----2%
the above dosages are for guidance only. Actual condition may vary from film to film, process to process and also upon the thickness of the film and its specific-uses.
material--mixing
to get the best results in case of extrusion, it is advisable to mix the material thoroughly before feeding in a hopper.
applications
stretch—cling---wrap----film
storage
there should be no problems in storing of pt-60-pib. The storage life is six months of pt-60-pib at 25c, although not very sensitive to heat and humidity , proper storage will prolong the storage life of the product.