Pillar Drilling Machine, Driven Type : Electric

Supply TypeManufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

• Main spindle and pinion made from EN steel by forging. • Column, arm, work-head & gears made from finest closed grain cast iron; while spindle Ram trim Alloy steel. • Main spindle....

View More Details

Send Enquiry

Company Information

India International Marketing Co.

Mayapuri, Delhi

View Number

Member Since 20 Years
Nature of Business Manufacturer
GST No. 07AAFFI7020K1ZE

Ask for more detail from the seller

Contact Supplier

Report incorrect details

View Company Details

Product Details
Company Details

•  Main spindle and pinion made from EN steel by forging.
•  Column, arm, work-head & gears made from finest closed grain cast iron; while spindle Ram trim Alloy steel.
•  Main spindle run out is checked for accuracy as per IS 2199.
•  For the smooth sliding of sliding arm, special 'slide-reliever-slots' are given.
•  All moving parts are fine-finished with grinding to a close tolerance.
•  International technic of 'Taper wedge setting'. for complete slide-setting instead of normal one point setting.
•  Quality bearings with grease bath, so for permanent oiling.
•  Main gear and pulley are perfectly balanced.
•  Powder coated accessories for longer life and prevention of corrosion and pillage associated with usual chrome plating.

•  P = Pillar Drill m/c
•  19/25/40 = Drilling capacity
•  S = Square Head Model
•  R = Round Head Model
•  L = Long Spindle Travel
•  A = Autofeed Model
•  X = Xtra Heavy Model

Specification		40A	40	25	25	20
	Tilting working table	FIXED	FIXED	Upto 360°	FIXED	Upto 360°
	Drilling capacity	40mm	40mm	25mm	25mm	20mm
	Pillar Diameter	135mm	121mm	92mm	92mm	74.30mm
	Spindle nose to table distance	495mm	595mm	645mm	660mm	650mm
	Distance from Spindle nose to base distance	1000mm	1050mm	1000mm	1045mm	900mm
*Autofeed speed : (applies to PSL-40A only) 0.04 or 0.08
	Distance from spindle center to pillar surface (in mm)	380 (Max.)	320 (Max.)	250 (Max.)	250 (Max.)	200 (Max.)
	Table travel	500mm	480mm	480mm	480mm	200mm
	Taper in spindle	MT-4	MT-4	MT-3	MT-3	MT-2
	Number of Speed	8 speed	8 speed	8 speed	8 speed	8 speed
	Range of speed (RPM)	60 to 2000	70 to 2000	70 to 2000	130 to 2600	80 to 3500
	Table Size (in mm)	490 x 490	410 x 410	350 DIA.	330 x 330	260 x 260
	Base Size (m/c Area in mm)	820 x 490	440 x 715	255 x 310	365 x 575	470 x 320
	Overall Base Size (in mm)	825 x 495	445 x 720	425 x 670	370 x 580	490 x 310
	Spindle Travel	250mm	250mm	250mm	180mm	130mm
	Pillar Length	1475mm	1450mm	1400mm	1410mm	110mm
	Overall height with pulley guard	1840mm	1860mm	1780mm	1730mm	1420mm
	V-Belt section	B-74"	B-59	B-51	B-52"	A-42"
	Weight (Approx.)	500 Kgs	325 Kgs	250 Kgs	225 Kgs	110 Kgs
	Motor 1440 RPM 3 Phase 440 Volts	2 H.P.	1.5 H.P.	1 H.P.	1 H.P.	0.5 H.P.
	Shipping wooden case inner size LxWxH	1200x540 x1860 mm	860x460x 1580 mm	690x460x 1550 mm	850x450x 1770 mm	660x380x 1440 mm