OUTSTANDING PERFORMANCE

• Wide Resilience Range
• Highly Resistant to Impact
• High Load Bearing Capacity
• Excellent Tear Strength
• Excellent Abrasion Resistance
• Superior Flex Fatigue Resistance
• Resistant to Oil, Grease and Lubricants

TYPICAL APPLICATIONS

• Stripper Bushes for Moulds & Dies
• Press Brake Pads
• Metal Forming Dies (as Cast)
• Shock Absorbers
• Wear & Cutting Pads

Polyurethane Elastomers

Polyurethane is a new wonder material which combines the strength of plastic and elasticity of rubber. P.U. can sustain very high loads at higher hardness than rubber. Unlike rubber it does not take part in weathering or chemical actions under normal condition and does not disintegrate easily. Life expectancy is very high. Because of these exceptional properties Polyurethane Springs and pads are ideally suited Press Tools, Jigs, Fixtures, Conveyors, Machine Tools etc. where the action of stripping , forming, damping cushioning, resting or rolling are involved. For optimum performance , best results and longer life, selection of variety of applications.

Polyurethane Springs: Polyurethane Springs are available in Tubular as well as Rod form. The dimensional Ø16mm to Ø120mm. These are standard internal diameters, selected taking proper care of section  area for maximum load bearing capacity.

Pads/Mats: The Pads and Mats are available in standard size where thickness ranges from 3mm to 40mm. Minimum size available in any thickness is 250mm x 250mm.

TPP Strippers: Turret Punch Press Strippers are used as strippers in high speed presses where the speed is 120 strokes/min. The high resilience of the material is made use of in this application.

OUTSTANDING PERFORMANCE

• Wide Resilience Range
• Highly Resistant to Impact
• High Load Bearing Capacity
• Excellent Tear Strength
• Excellent Abrasion Resistance
• Superior Flex Fatigue Resistance
• Resistant to Oil, Grease and Lubricants

TYPICAL APPLICATIONS

• Stripper Bushes for Moulds & Dies
• Press Brake Pads
• Metal Forming Dies (as Cast)
• Shock Absorbers
• Wear & Cutting Pads

Polyurethane Elastomers

Polyurethane is a new wonder material which combines the strength of plastic and elasticity of rubber. P.U. can sustain very high loads at higher hardness than rubber. Unlike rubber it does not take part in weathering or chemical actions under normal condition and does not disintegrate easily. Life expectancy is very high. Because of these exceptional properties Polyurethane Springs and pads are ideally suited Press Tools, Jigs, Fixtures, Conveyors, Machine Tools etc. where the action of stripping , forming, damping cushioning, resting or rolling are involved. For optimum performance , best results and longer life, selection of variety of applications.

Polyurethane Springs: Polyurethane Springs are available in Tubular as well as Rod form. The dimensional Ø16mm to Ø120mm. These are standard internal diameters, selected taking proper care of section  area for maximum load bearing capacity.

Pads/Mats: The Pads and Mats are available in standard size where thickness ranges from 3mm to 40mm. Minimum size available in any thickness is 250mm x 250mm.

TPP Strippers: Turret Punch Press Strippers are used as strippers in high speed presses where the speed is 120 strokes/min. The high resilience of the material is made use of in this application.