the wire nails making machines manufacture wire nails; the nails are to be polished as well as finished products. the quality of the nails produced depend upon the wire used on the machines, generally the wire received from the supplier is found dull to wire drawing process and also some times get rusted due to weather effect. the wire for processes of cutting nails is not so bright and as a result, the nails produced do not have brightness and shinning. such finished are not acceptable to the buyers thus the nails do require polishing which result in attractive finished products to eliminate this problem. we have manufactured polishing machine.method for polishing nails:-load the polishing drums with the wire nails up to a level 4" to 5" above the half filled level. if nails are rusty add half liter of kerosene before adding sawdust and run the drum 15 minutes with blind lid fixed. after that put sawdust in the drum up to 80% of the full level. fix the blind lid and run the drum for about half hour. this will rest in bright and shinning nails. if more finish is require, it is advisable to use soft leather cuttings in second sequence of polishing instead of sawdust 18 to 20 kgs of such leather cuttings are required. these leather cuttings can apply again for 20 - 25 cycles till they very oily. now nails ready for dispatch.

the wire nails making machines manufacture wire nails; the nails are to be polished as well as finished products. the quality of the nails produced depend upon the wire used on the machines, generally the wire received from the supplier is found dull to wire drawing process and also some times get rusted due to weather effect. the wire for processes of cutting nails is not so bright and as a result, the nails produced do not have brightness and shinning. such finished are not acceptable to the buyers thus the nails do require polishing which result in attractive finished products to eliminate this problem. we have manufactured polishing machine.method for polishing nails:-load the polishing drums with the wire nails up to a level 4" to 5" above the half filled level. if nails are rusty add half liter of kerosene before adding sawdust and run the drum 15 minutes with blind lid fixed. after that put sawdust in the drum up to 80% of the full level. fix the blind lid and run the drum for about half hour. this will rest in bright and shinning nails. if more finish is require, it is advisable to use soft leather cuttings in second sequence of polishing instead of sawdust 18 to 20 kgs of such leather cuttings are required. these leather cuttings can apply again for 20 - 25 cycles till they very oily. now nails ready for dispatch.