Polyken980-30 Cold Applied Wrap Tape

Polyken cold applied wrap tape description the temperature of the polyken cold applied wrap tape rewinding must be above 5 degrees c, and the construction of the anticorrosion layer should be carried out above -5 c.  (experience shows that the wrapping can be carried out at a lower temperature of -30 c, but to ensure the temperature of the deconvolution.)  when the ambient temperature is below 10 deg c, in order to ensure the instant adhesive tape has good bond strength, should adopt the torch tube and baking adhesive surface heating tape.for the weld, if necessary, should be strengthened with a narrow strip of 30-50 millimeter width, first covered in the weld and compacted with a hand or a wooden slippery tool.  polyken cold applied wrap tape including inner wrap tape, outer wrap tape,joint wrap tape.  polyken cold applied wrap tape properties polyken cold applied wrap tapestructure and specifications backing :  special blend of stabilized polyethylene adhesive : butyl rubber and adhesion promoting resins total tape thickness in mils:15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm) tape width in inches:2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) tape roll length in feet:100ft(30m),200ft(61m),400ft(122m),600ft(183m),800ft(244m) other production recommendation polyken955 outer tape,polykenpetrolatum tape, polyken aluminum butyl tape.