We are offering portable bunk house cabin.
1). Base : 125mm x 65mm ã¢â‚¬å“iã¢â‚¬â beam, cross member of 100mm x 50mm I beam, with 50mm x 50mm angle mounted with 18mm marine ply and vinyl flooring.
2). Roof : top outer curved type m.s.1.2mm(18swg) plain sheet welded with m.s. Frame structure, top inner decorated with 9mm mdf board.
3). Cage structure & wall panel :ms frame work with square pipe & wall thickness 50mm.
exterior wall : m.s. 1.2mm. Bended sheet welded on m.s. Frame.
internal wall : 9mm. Mdf board.
4). Insulation: all void within the external wall, inner wall & roof are filled with r.b. Glass wool of 50mm. Thick which posses a rare combination of lower thermal conductivity & high resistance to moisture & heat.
5). Door: frame work of 30mm x 30mm square pipe external wall made by m.s. Sheet & inner wall decorated with 9mm. Mdf board & suitable locking system.
6). Window: window shall be of aluminium black powder coated double shutter sliding type, with dark float glass & venetian blind covered by grill from the outside.
7). Paint: all components are washed thoroughly with epoxy thinner, joints filled with carpage and then painted with epoxy red oxide both outside/inside & then painted with two coats of epoxy paint. (this is done to give an aesthetic look to the cabin and it also has a longer life compared to other paints.)
8). Airconditioning: provision for split or window a/c is provided as per the requirement.
9). Electrical: all electric wiring will be concealed & fitted with modular switches & sockets, fans, tube lights & bulk head light above the door will be provided.

We are offering portable bunk house cabin.
1). Base : 125mm x 65mm ã¢â‚¬å“iã¢â‚¬â beam, cross member of 100mm x 50mm I beam, with 50mm x 50mm angle mounted with 18mm marine ply and vinyl flooring.
2). Roof : top outer curved type m.s.1.2mm(18swg) plain sheet welded with m.s. Frame structure, top inner decorated with 9mm mdf board.
3). Cage structure & wall panel :ms frame work with square pipe & wall thickness 50mm.
exterior wall : m.s. 1.2mm. Bended sheet welded on m.s. Frame.
internal wall : 9mm. Mdf board.
4). Insulation: all void within the external wall, inner wall & roof are filled with r.b. Glass wool of 50mm. Thick which posses a rare combination of lower thermal conductivity & high resistance to moisture & heat.
5). Door: frame work of 30mm x 30mm square pipe external wall made by m.s. Sheet & inner wall decorated with 9mm. Mdf board & suitable locking system.
6). Window: window shall be of aluminium black powder coated double shutter sliding type, with dark float glass & venetian blind covered by grill from the outside.
7). Paint: all components are washed thoroughly with epoxy thinner, joints filled with carpage and then painted with epoxy red oxide both outside/inside & then painted with two coats of epoxy paint. (this is done to give an aesthetic look to the cabin and it also has a longer life compared to other paints.)
8). Airconditioning: provision for split or window a/c is provided as per the requirement.
9). Electrical: all electric wiring will be concealed & fitted with modular switches & sockets, fans, tube lights & bulk head light above the door will be provided.