Listing ID #3945651
Company Information
Ask for more detail from the seller
Contact SupplierWe are engaged in manufacturing of power control centers from the best raw materials.We meet the requirements of International Standards along with compliance to local standards and regulations.
The complete structure shall be rigid, self supporting & free from twists and bends. They will have fixed or draw out type executions as many be desired. The panels will be totally dust and vermin proof.The entire panel will undergo 7/8 tank pretreatment process covering degreasing, water rinsing & de-rusting/ phosphating. It will be powder coated with RAL 7032(Siemens Grey) /7035/2000 as per requirements.
Aluminium / Copper Bus will be placed through out the length of the panel bars supported on appropriate SMC /DMC insulators / finger supports. Internal wiring shall be carried out with 1100/650 volt grade PVC insulated multi stranded copper flexible wire. All joints will be solidly crimped using copper thimbles Earthing Bus Bars will be running all along the board.
Switch Gears/ Components Along with the General Arrangement (GA) drawing ,Single line diagram (SLD) and bill of material (BOQ/BOM) will be submitted specifying the makes & capacities of all the material to be used in the panel.Our Panels confirms to the standards such as, IS 4237; IS 8623; IS 375 Switch Gears/ Components .
TYPE | Fixed , drawout ,compartmentalized ,dust & vermin proof |
PROTECTION CLASS | IP42 / IP 54 – Optional |
RATED VOLTAGE | Std. 415 / 440 V, 50 HZ, 3 phase, 4 wire |
RATED CURRENT | As per requirement |
SHORT CIRCUIT LEVEL | 35 KA / 50 KA /70KA for 1 sec |
ENCLOSURE TYPE | Indoor / Outdoor |
BUSBAR SUPPORT | SMC/DMC, Epoxy. |
BUSBAR | Aluminium / Copper, Electrolytic grade |
STANDARD | IS 8623 |
BUS CHAMBER | Air cooled with louvers |
CABLE ALLEY | Ample space for cabling with supports |
CABLE ENTRY | Top or Bottom |