Primary Non-metallic Surface Hardener

The main non-metallic floor curing agent is a new type of industrial floor. It uses metal, non-metallic and other wear-resistant aggregates combined with a variety of additional hardener components, and solidified with the newly cast concrete layer to form a dense, wear-resistant, impact-resistant smooth surface. Widely used in heavy machinery workshops, dust-proof, wear-proof and moisture-proof workplaces. The scope of application applies to places where impact resistance and dust reduction are required, such as: warehouses, docks, factories, parking lots, maintenance workshops, garages, warehouses, etc. Performance characteristics 1, impact resistance, heavy pressure, good mechanical properties; 2, dust, mildew, wear-resistant, good hardness; 3, heavy pressure resistance, strong wear resistance, no dust, enhanced resistance to ground oil, anti-infiltration; 4, bright appearance, rich and varied colors; 5, easy to clean, easy to maintain. Useful life synchronize with concrete ground basic requirements: the concrete strength of the grass-roots level should be above c25, the water-cement ratio should be controlled below 0.50, and the difference in concrete shedding should be controlled within 70-100mm. The concrete mixture should minimize segregation and control the leakage; in order to ensure the full fluidity of the concrete mixture and construction is conducive to construction, it is recommended to add appropriate additives in the concrete.