Countronics Programmable Counter 96mm X 96mm. Depth 50mm

PROGRAMMABLE COUNTER - MODEL 254D

Features

 4 Digit Preset Counter with separate displays for Count and Set Limit

 Large 0.8” display for count, 0.56”

 Programmable Multiplying and dividing factor

 Pre-settable Batch Counter

 Up/Down Counting Selectable

 Normal/Auto-Reset with Time setting

 Non-Volatile memory to hold settings and counts

 Password for Program configuration lock

Specifications

 Display : 4 Digit, 7 segment LED display (0.8” height) for Count
                 4 Digit, 7 segment LED display (0.56” height) for Limit

 Range : Maximum Count of 9999

 Set Points : Single set points programmable from 1-9999

 Batch Limit : Batch limit setting from 0 to 999

 Operating Modes : a. Auto Mode (Time Settable) b. Manual Mode (Delay set to Zero)

 Count Inputs : a. Voltage Pulse : 3V to 30V DC amplitude from proximity switch
                          b. Potential free contact from limit switch, relay or micro switch

 Input Frequency : 0 to 1 KHz

 Sensor Supply : 10V DC, short circuit protected

 Multiplying Factor: Programmable from 1-99

 Division Factor : Programmable from 1 to 99

 Reset Input : a. Front Panel b. Remote reset by rear terminals

 Relay Outputs : NO-Pole-NC contact rated at 5Amp @ 230 V AC

 Memory Retention: 10 years

 Configuration Lock: By Password

 Mounting : Panel Mounting

 Size : 96mm x 96mm. Depth 50mm

 Weight : Approx. 375 gms.

 Operating Temp. : 0-50 ̊C

 Humidity : 95% RH