Listing ID #4935809
Company Information
Ask for more detail from the seller
Contact Supplier
MATERIAL
When the lined piping system will be lagged, please specify that the spools and fittings should be supplied with vent extensions, these 75mm long extension protrude through the lagging allowing the correct venting of the lined equipment.
All lined piping systems must have vent holes drilled through the steel body. This is for 2 reasons, firstly to vent any gasses that may permeate through the liner witch can be detrimental to liner life to the atmosphere rather than allow them to build up behind the liner trapped within the steel pipe. Pipe spools less than 500mm have 2 off vent holes located centrally, longer spools have 4 vent holes 1 pair located at each end.
| NOMINAL BORE NB | INTERNAL DIA (D) | PTFE LINER THICKNESS (T) | FLANGE PCD | FLANGEHOLE DIA | RAISED FACE DIA(R/F) | MAXI. LENGTH | PIPE SCHEDULE | ||
| (MM) | (INCHES) | (+1 MM) | (MM) | (MM) | (MM) | (MM) | (MM) | ||
| 25 | 1 | 19.5 | 3.3 | 79.4 | 15.9 | 51 | 3000 | 40 | |
| 40 | 1.5 | 33.8 | 3.3 | 98.4 | 15.9 | 73 | 3000 | 40 | |
| 50 | 2 | 45.4 | 3.3 | 120.6 | 19.0 | 92 | 3000 | 40 | |
| 80 | 3 | 70.8 | 3.3 | 152.4 | 19.0 | 127 | 3000 | 40 | |
| 100 | 4 | 95.2 | 3.8 | 190.5 | 19.0 | 157 | 3000 | 40 | |
| 150 | 6 | 145.1 | 4.5 | 241.3 | 22.2 | 216 | 3000 | 40 | |
| 200 | 8 | 197.4 | 5.0 | 298.4 | 22.2 | 270 | 3000 | 30 | |
| 250 | 10 | 249.3 | 6.0 | 362.0 | 25.4 | 324 | 3000 | 30 | |
| 300 | 12 | 300.1 | 6.0 | 431.8 | 25.4 | 381 | |||
Connect with us
For Buyer 
For Seller 
Help 
