technical data

model →  ym-1. bore size → 100 mm (4")

power → 0.37 kw. h.p. → 0.50. stage → 10. current in amps → 6.00.

version → single phase 140 to 240 volt. rated speed in rpm → 2880.

frequency → 50 hz. category → b. duty type → s1(continuous).

type → wet type. connection → parallel (cscr).

 operating data

duty point head → 40 meters. duty point discharge → 30 lpm  1.80 m³/hr.

operating head range → 30 to 54 meters. operating discharge range →  45 to 20 lpm

out late →  25 mm  (1")

correct speed in rpm →  2790

maximum flow rate →  60 lpm  3.60 m³/hr

total head → 60 meters. maximum operating pressure → 6.0 bar.

maximum liquid temperature → 35º. 

particulars materials of construction

motor body / pump body → s.s. 202. bearing bush → ltb - 4 bronze

motor shaft / pump shaft → s.s.410. thrust bearing → s.s. 420 & graphite carbon.

housing / base / nrv/ suction → ci - fg -200. stamping → crno - m45.

screws / studs → s.s. 410 & s.s. 202. impeller / bowl → noryl gnf2 techno polymer.

winding wire → e.c. grade high insulation. rotor → e.c. grade copper & crno - m45.

pcd cup → nitrile rubber.

technical data

model →  ym-1. bore size → 100 mm (4")

power → 0.37 kw. h.p. → 0.50. stage → 10. current in amps → 6.00.

version → single phase 140 to 240 volt. rated speed in rpm → 2880.

frequency → 50 hz. category → b. duty type → s1(continuous).

type → wet type. connection → parallel (cscr).

 operating data

duty point head → 40 meters. duty point discharge → 30 lpm  1.80 m³/hr.

operating head range → 30 to 54 meters. operating discharge range →  45 to 20 lpm

out late →  25 mm  (1")

correct speed in rpm →  2790

maximum flow rate →  60 lpm  3.60 m³/hr

total head → 60 meters. maximum operating pressure → 6.0 bar.

maximum liquid temperature → 35º. 

particulars materials of construction

motor body / pump body → s.s. 202. bearing bush → ltb - 4 bronze

motor shaft / pump shaft → s.s.410. thrust bearing → s.s. 420 & graphite carbon.

housing / base / nrv/ suction → ci - fg -200. stamping → crno - m45.

screws / studs → s.s. 410 & s.s. 202. impeller / bowl → noryl gnf2 techno polymer.

winding wire → e.c. grade high insulation. rotor → e.c. grade copper & crno - m45.

pcd cup → nitrile rubber.