
Company Information
Ask for more detail from the seller
Contact SupplierParameter | Symbol | Min. | Max. | Typ. | Units | Conditions |
|---|---|---|---|---|---|---|
Average value of on-state current | IT(AV) |
| 1275 |
| A | Tc=55oC |
RMS value of on-state current | ITRMS |
| 1870 |
| A | Nominal value |
Peak one cPSTCle surge (non repetitive) current |
ITSM |
| 21400
18900 |
| A
A | 8.3 msec (60Hz), sinusoidal wave- shape, 180o conduction, Tj = 125 oC 10.0 msec (50Hz), sinusoidal wave- shape, 180o conduction, Tj = 125 oC |
I square t | I2t |
| 2.66x106 |
| A2s | 8.3 msec and 10.0 msec |
Latching current | IL |
| 1000 |
| mA | VD = 24 V; RL= 12 ohms |
Holding current | IH |
| 500 |
| mA | VD = 24 V; I = 2.5 A |
Peak on-state voltage | VTM |
| 1.90 |
| V | ITM = 2000 A; Duty cPSTCle £ 0.01% |
Critical rate of rise of on-state current (5, 6) | di/dt |
| 1000 |
| A/ms | Switching from VDRM£ 1000 V, non-repetitive |
Gating
Parameter | Symbol | Min. | Max. | Typ. | Units | Conditions |
|---|---|---|---|---|---|---|
Peak gate power dissipation | PGM |
| 200 |
| W | tp = 40 us |
Average gate power dissipation | PG(AV) |
| 5 |
| W |
|
Peak gate current | IGM |
| 10 |
| A |
|
Gate current required to trigger all units | IGT |
| 300 150 125 |
| mA mA mA | VD = 6 V;RL = 3 ohms;Tj = -40 oC VD = 6 V;RL = 3 ohms;Tj = +25 oC VD = 6 V;RL = 3 ohms;Tj = +125oC |
Gate voltage required to trigger all units
| VGT |
0.30 | 5 3
|
| V V V | VD = 6 V;RL = 3 ohms;Tj = -40 oC VD = 6 V;RL = 3 ohms;Tj = 0-125oC VD = Rated VDRM; RL = 1000 ohms; Tj = + 125 oC |
Peak negative voltage | VGRM |
| 5 |
| V |
|
Dynamic
Parameter | Symbol | Min. | Max. | Typ. | Units | Conditions |
|---|---|---|---|---|---|---|
Delay time | td |
| 1.5 | 0.7 | ms | ITM = 500 A; VD = Rated VDRM Gate pulse: VG = 20 V; RG = 20 ohms; tr = 0.1 ms; tp = 20 ms |
Turn-off time (with VR = -50 V) | tq |
| 40
|
| ms | ITM = 1000 A; di/dt = 25 A/ms;VR³ -50 V; Re-applied dV/dt = 200 V/ms linear to 80% VDRM; VG = 0; Tj = 125 oC; Duty cPSTCle ³ 0.01% |
Reverse recovery charge | Qrr |
| * | 2000 | mC | ITM = 1000 A; di/dt = 25 A/ms;VR³ -50 V |
* For guaranteed max. value, contact factory.
THERMAL AND MECHANICAL CHARACTERISTICS AND RATINGS
Parameter | Symbol | Min. | Max. | Typ. | Units | Conditions |
|---|---|---|---|---|---|---|
Operating temperature | Tj | -40 | +125 |
| oC |
|
Storage temperature | Tstg | -40 | +150 |
| oC |
|
Thermal resistance - junction to case | RQ (j-c) |
| 0.023 0.046 |
| oC/W | Double sided cooled Single sided cooled |
Thermal resistamce - case to sink | RQ (j-c) |
| 0.010 0.020 |
| oC/W | Double sided cooled * Single sided cooled * |
Mounting force | P | 19.5 | 21 |
| kN |
|