Rectangular Water Bath

THERMOSTATICALLY CONTROLLED 
CONSTRUCTION 
VITCO water bath are double walled inside made of heavy gauage brass/coppers heavenly tinned from inside and outer body of mild steel The gap of 1”between two wall is filled with glass wool as insulation to protect loss heat. The cover of the bath is made of brass/copper with concentricing of 75mm dia, which are nicely chromium plated. 
HEATERS 
The bath has U shaped immersion type heater, which is extended to the full length of the bath in order to maintain equal and uniform temperature. 
TEMPERATURE CONTROL 
The temperature is controlled up to 100 °c with an accuracy of + 0.5 °c. 
FINISH 
The bath is painted in blued white stoved enamel paint with a colored panel. 
NORMAL EQUIPMENTS 
The panel has an on off switch . Two light and a thermostat.It is also provided with a drain cork plug and cord to work on 220/30 Volts AC.
12” x 10” x 4” with 6 holes of 3” dia 
12” x 12” x 4” with 9 holes of 3” dia 
16” x 12” x 4” with 12 holes of 3” dia 
Water Bath Rectangular (Single wall) VT.401.08.CH.A 
Body made out of thick stainless steel. Top made out of chrome plated sheet. Concentric rings to cover 3” dia holes are provided. Heating elements have an automatic cut-off device which operates when the bath gets dried. Equipment working on 220 V AC 50 Hz single phase.A) 6 holes B) 12 holes.