Red Non-metallic Floor Hardener

Red non-metallic floor hardener is suitable for the industrial site, wharf, parking lot, commercial market, logistics warehouse and other ground decoration needs. It has the advantages of resisting pressure, reducing dust, hard surface, easy to clean and economical. Red non-metallic floor hardener the performance characteristics of 1. Resistance to impact, pressure and mechanical performance; 2. Dustproof, mildew proof, abrasion resistance, good hardness; 3. Anti-stress, abrasion resistance, dust removal, enhanced surface oil resistance, anti-penetration; 4. The appearance is smooth and bright and colorful; 5. Convenient for cleaning and maintenance. Use fixed number of year synchronize with concrete ground. Basic requirements: the concrete strength requirements of the concrete base are above c25, and the water-cement ratio is below 0.50, and the concrete slump should be controlled at 70-100mm, and the concrete mixing plant can reduce the segregation and control the bleeding. In order to ensure that the concrete mix is sufficiently liquid and conducive to construction, concrete admixture is recommended. The concrete should be poured and vibrated according to the standard of good concrete, and the size should be taken care of and the slurry will be reduced. Hardener surface layer with concrete structure construction at the same time, such as screed-coat construction at the same time, suggest using fine aggregate concrete, concrete leveling layer thickness of not less than 50 m.