Reinforced Plastic Tarpaulin

Size / roll4.00 m x 50.00 m +- 1
Tensile strengthMin 600N both directions warp and weft (BS 2576, 50mm grab test or equivalent)
WeldingOnly 1 is allowed, lengthwise. Min resistance 80% of original tarpaulin tensile strength in the weft under ISO 1421 plus additional procedure
Size / sheet4.00 m x 5.00 m +- 1
Supply TypeManufacturer, Supplier
Preferred Buyer Location All over the world

Company Information

Ask for more detail from the seller

Report incorrect details

EyeletsAluminum reinforcement eyelets or equivalent on 4 sheet sides of single sheets at 100cm (±5 cm) Centre to Centre, providing very strong fixation
UV resistanceMax 5% loss of original tensile strength under ISO 1421 after 1500 hours UV under ASTM G53/94 (UVB 313nm peak)
Sheet / roll190 gsm ±20 g/m² woven Polyethylene (HDPE) inner black fibers, warp x weft, laminated on both sides with LDPE coating
Tensile strengthMin 600N both directions warp and weft (BS 2576, 50mm grab test or equivalent)
Width and length---
Tear strengthMin 100N both directions (BS 4303 wing tear or equivalent) or under ISO 4674 (A2)
Materials-----
DenierMin 1000
Size / sheet4.00 m x 5.00 m +- 1
WeldingOnly 1 is allowed, lengthwise. Min resistance 80% of original tarpaulin tensile strength in the weft under ISO 1421 plus additional procedure
Size / roll4.00 m x 50.00 m +- 1

Key Features:

Reinforced plastic tarpaulin in 4 m x 5 m sheets or 4 m x 50 m rolls developed by international research project and designed for long outdoor use in all climates
Made of woven high density black polyethylene (HDPE) fibres, warp x weft, laminated on both sides with low density polyethylene (LDPE) coating
Highly recommended for family shelter protection

Size / sheet	4.00 m x 5.00 m ±1
Size / roll	4.00 m x 50.00 m ±1

Sheet / roll	190 gsm ±20 g/m² woven Polyethylene (HDPE) inner black fibers, warp x weft, laminated on both sides with LDPE coating
Denier	Min 1000
Tensile strength	Min 600N both directions warp and weft (BS 2576, 50mm grab test or equivalent)
Tear strength	Min 100N both directions (BS 4303 wing tear or equivalent) or under ISO 4674 (A2)
UV resistance	Max 5% loss of original tensile strength under ISO 1421 after 1500 hours UV under ASTM G53/94 (UVB 313nm peak)
Welding	Only 1 is allowed, lengthwise. Min resistance 80% of original tarpaulin tensile strength in the weft under ISO 1421 plus additional procedure
Eyelets	Aluminum reinforcement eyelets or equivalent on 4 sheet sides of single sheets at 100cm (±5 cm) Centre to Centre, providing very strong fixation