Listing ID #2145804
Company Information
Ask for more detail from the seller
Contact SupplierResin Coated Sand is one of the most demanded products that we bring. This product is used in the production of cores & moulds by shell process with superb hot strength. Also, it is prepared form high grade Quartz sand, Silica sand, Ceramic sand, Chromite, Zircon sand by procoating it with phenol formaldehyde (PF) resin and catalyst. Our resin - coated sand is very smooth, free flowing and dry with good resistance to moisture.
We maintain proper schedules for the delivery of bulk or urgent consignments so as to deliver the range in set time and gain utmost customer satisfaction. Rest assured for the safety of the products as we have the best facilities at our end. In addition, we have appointed a responsible staff to keep a vigil eye over the same. Highlights of Resin Coated Sand Silica Content in our Quartz is 99.2% and above. We can give Resin coated sand from 40AFS to 120AFS We can give 80 to 85% of RCS in 3 sieves distribution for better surface finish & improved collapsibility. Sand has very good flowability. Their is through curing of cores During pouring it will withstand thermal shock and the moulds will not crack during pouring. The ejection of the moulds is smooth & there are no Sub surface cracks in the mould. Low gas & low Nitrogen content for steel castings.
Grades : This is a range of a Resin Coated Send used in production of cores & moulds by shell process with superb hot strength. It is prepared form high grade Quartz sand, Silica sand, Ceramic sand, Chromite, Zircon sand by procoating it with phenol formaldehyde (PF) resin and catalyst. This resin - coated sand is very smooth, free flowing and dry with good resistance to moisture.
Our product line for various non ferrous casting such as cylinder head, cylinder block, water jacket manifold and hollow pipes with good surface finish and excellent collapsibility.
Code | Product | Specifications | Characteristics | |
H.T.S | ||||
HK10 | HKNF A | 10-12 kg/cm2 | AFS | 55-80 |
HK11 | HKNF B | 12-14 kg/cm2 | GAS | 12-18 cc/gm |
HK12 | HKNF C | 16-20 kg/cm2 | STICK POINT | 94-97 deg C |
HK13 | HKNF- D | 22-28 kg/cm2 | L.O.I | 1.8-3.7 % |
Our product line for this grade is suitable for casting such as camshaft, crankshaft, turbine housing casting, valve guide, water jacket.
Code | Product | Specifications | Characteristics | |
H.T.S | ||||
HK14 | HKCI A | 24-28 kg/cm2 | AFS | 52-80 |
HK15 | HKSG B | 30-35 kg/cm2 | GAS | 16-22 cc/gm |
HK16 | HKSG C | 36-38 kg/cm2 | STICK POINT | 98-100 deg C |
HK17 | HKSG D | 40-44 kg/cm2 | L.O.I | 3.5-4.5 % |
CTS can be 15-30% Higher than HTS (If desired) |
This grade is suitable for alloy steel castings; sand has very low nitrogen content cores and moulds will with stand high thermal shock resistance. Suitable for jaw tooth , petrochemical valves , head, block etc.
Code | Product | Specifications | Characteristics | |
H.T.S | ||||
HK18 | HKLN A | 16-18 kg/cm2 | AFS | 52-67 |
HK19 | HKLN B | 22-25 kg/cm2 | GAS | 10-15 cc/gm |
HK20 | HKLN C | 32-35 kg/cm2 | Stick Point | 100-101 deg C |
L.O.I | 2.5-4.5 % |