RT-AK Flow Transmitter

Get Latest Price

MOQ50 Piece
Measurement accuracyÂ±1 % of full scale value in the specified metering range, including linearity and repeatability
Supply voltage10..30 V DC
Medium temperature-20..+85 Â°C optionally -20..+150 Â°C (for 8 bar min.)
Max. load current100 mA
Supply TypeExporter, Supplier
Preferred Buyer Location All over the world

View More Details

Send Enquiry

Company Information

J V M Tech Engineering

Sanand, Ahmedabad, Gujarat

4.2/5

(6)

View Number

Member Since 9 Years
Nature of Business Retailer
GST No. 24CXWPP9877P1ZT

Ask for more detail from the seller

Contact Supplier

Report incorrect details

View Company Details

Product Details
Company Details

Metering ranges1.8..1133 l/min
Storage temperature-20..+80 Â°C
Nominal widthDN 15..50
Measurement accuracyÂ±1 % of full scale value in the specified metering range, including linearity and repeatability
Pressure loss0.3 bar at Qmax.
Ingress protectionIP 67
Max. load current100 mA
Current consumption20 mA without load
Sensorbiased Hall sensor
Material electronics housingCW614N nickelled
Ambient temperature-20..+70 Â°C
Electrical connectionfor round plug connector M12x1, 4-pole
Max. particle size0.5 mm
Pressure resistancePN 250 bar
Medium temperature-20..+85 Â°C optionally -20..+150 Â°C (for 8 bar min.)
ConformityCE
MakeHonsberg
Process connectionmale thread G 1/2 A...G 2 A
Supply voltage10..30 V DC

Details :

High precision
No magnetic components in the flow space
High pressure resistance

Characteristics :

A turbine acts as the primary sensor; its rotational speed is proportional to the flow rate.
The rotational speed is detected by means of a biased Hall sensors, i.e. there are no magnets in the flow space.

Handling and Operation :
Installation : As with all flow meters, if possible the turbine should be installed ahead of a valve (on the pressure side). Good degassing should be ensured. 10 x D calming sections are recommended before and after the turbine in order to maintain the specified accuracies. The turbine should be filled with fluid at all times. The electronics housing does not project into the flow space.
Options :