Listing ID #3818801
Company Information
Ask for more detail from the seller
Contact SupplierWater based rust preventive are the latest generation of Rust Prevention Oils which are also eco-friendly. This is due to ability of mixing with high water content & solvent free product which upon evaporation does not harm the environment & doesn’t release CFC’s or gases that may harm the environment.
The WRP 910 Conc. is delivered as a brown emulsion that has to be mixed with H2O in 1:10 to 1:5 concentration. The final film left after application allows water to evaporate and forms a rust preventive film.
WRP 910 Conc. is corrosion preventive for medium to short term and can be spray or dip applied on to the components.
WRP 910 Conc. also contains VCI chemicals which also work in vapour phase and prevents corrosion in areas which may not have been directly contacted with the rust preventive.
Â
APPLICATION METHODCastings, Forgings, Steel Tubes, Rods, Fasteners Machined Components, Gears and Bearings
Â
Safety InformationÂRUST-X products do not contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6), Polybrominated biphenyls (PBB), or Polybrominated di-phenylether complying with the re-stricted substances listed in Article 4(1) of the RoHS Directive
RUST-X products are also REACH Compliant for exports to the European Union.
Properties | Test Method | Value |
Color | White Emulsion | |
Viscosity @ cSt (conc) | 60 cST | |
Color | after | Transparent |
Corrosion Protection | Up to 3 months indoor Up to 1 days outdoors w/o direct rain |
|
Viscous (cSt) of Emulsion | 1.5-2.5 cSt at 10% dilution | |
Flash point | 190 degree C | |
Salt Spray Test | ASTMB117 | 96 hours for pure concentrate |
Humidity Chamber Test | ASTM 1748 | 600 hours for pure concenterate |
Film Thickness | 5-15 microns | |
Minimum dilution ration in | 1:5 | |
Maximum dilution ratio in | 1:15 | |
Density at 60 degree C | 0.92-0.94 | |
Washability | Yes | |
Removability | Yes | |
Paintability | Yes |