Scrubber

Listing ID #4273433

Gas gets into the scrubber tangentially through the bottom air intake, under the action of the fan, quickly filled the air intake segment space, and then flow evenly through uniform flow section up to the first stage feeding absorption section.

Small resistance, low consumption, low noise, high purification efficiency, compact structure, small cover space, good corrosion resistance and aging resistance, light weight.

• Production capacity : 300-1330mm
• Processable Material : Treatment of all kinds of harmful gases

  Gas gets into the scrubber tangentially through the bottom air intake, under the action of the fan, quickly filled the air intake segment space, and then flow evenly through uniform flow section up to the first stage feeding absorption section. On the surface of the filler, the pollutants in gas phase react with the liquid phase substance. The reaction resultant (mostly soluble salts) flowing into the lower portion of the reservoir with the absorption liquid. The gas not completely absorbed continues rises into the spray section. The absorption liquid sprays in high-speed through the uniformly distributed nozzle in the ejection segments, generating numerous small droplets continue react with the gas. This treatment can cool the exhaust gas to remove particles and other impurities. The tower uppermost segment is for defogging, and the absorbing liquid droplets carried by gas are cleared here. The treated clean air is blown into the atmosphere through the upper end of the scrubber.

Gas gets into the scrubber tangentially through the bottom air intake, under the action of the fan, quickly filled the air intake segment space, and then flow evenly through uniform flow section up to the first stage feeding absorption section. On the surface of the filler, the pollutants in gas phase react with the liquid phase substance. The reaction resultant (mostly soluble salts) flowing into the lower portion of the reservoir with the absorption liquid. The gas not completely absorbed continues rises into the spray section. The absorption liquid sprays in high-speed through the uniformly distributed nozzle in the ejection segments, generating numerous small droplets continue react with the gas. This treatment can cool the exhaust gas to remove particles and other impurities. The tower uppermost segment is for defogging, and the absorbing liquid droplets carried by gas are cleared here. The treated clean air is blown into the atmosphere through the upper end of the scrubber.

The Scrubber has A, B and C three models. A model is wet scrubber. B model is acid and alkaline gases scrubber. C model is organic gases and heat gases scrubber.