Self Priming Pumps

Vertical In-line

are used for handling solvents from tank farms and barrels. Available in 3 sizes
25 mm NB.
40 mm NB.
65 mm NB.

1. Low NPSH required.
2. Life lubricating bearing covered from both the ends so minor leakage from side does not affect bearings.
3 .Being a low speed (1450 RPM) pump, less Maintenance in needed.
4. Installation is easier since motor required is vertical flange type and is directly 5.coupled to the pump, coupling alignment is simpler.
6. Low overhang shaft arrangement giving minimum deflection at he seal faces.
7. Floating type impeller reduces noise and vibration. 8. Available only with mechanical seal (internal mounted), rotary faces of Carbon and 9.Glass Filled Teflon (GFT) are optional.
10. Seal cooled and flushed by process fluid itself.
11. Minor leakage at suction side does not affect pump performance.
12. Biggest advantage from installation point of view is that since it is an " in line type pump, it can be fitted as a valve and hence it will not require any suction or delivery piping efforts.
13. High head low capacity pump.
14. Available in S. S -316 Investment Casting and Cast Iron with all wetted parts of S.S � 316
15. Excellent for Handling solvents from barrels and from tank farms to the charging vessels.
16. Seal leakage can easily be detected from window in priming chamber.
17. Pump can take negative lift from 3 to 5 meters. 18. Maintenance is easier, Drain arrangement is standard.
19. Compact design � requires less space, No grouting required.