Siemens - (6ag1214-1be30-2xb0siplus S7-1200 CPU 1214c AC/DC/rly)

General information
engineering with
programming package step 7 basic v10.5
display
integrated no
supply voltage
120 v ac yes
230 v ac yes
permissible range, lower limit (ac) 85 v
permissible range, upper limit (ac) 264 v
line frequency
frequency of the supply voltage 47 hz
frequency of the supply voltage 63 hz
load voltage l+
rated value (dc) 24 v
permissible range, lower limit (dc) 5 v
permissible range, upper limit (dc) 250 v
input current
current consumption (rated value) 100 ma @ 120 vac 50 ma @ 240 vac
current consumption, max. 300 ma @ 120 vac 150 ma @ 240 vac
inrush current, max. 20 a; at 264 v
encoder supply
24 v encoder supply
24 v permissible range: 20.4 to 28.8 v
output current
current output to backplane bus (dc 5 v), max. 1600 ma; 5 vdc max. For sm and cm
power losses
power loss, typ. 14 w
memory
usable memory for user data 50 kbyte
work memory
integrated 50 kbyte
expandable no
load memory
integrated 2 mbyte
expandable, max. 24 mbyte; with siemens memory card
backup
present yes; entire project maintenance-free in the integral eeprom
without battery yes
cpu processing times
for bit operations, min. 0.1 µs; / operation
for word operations, min. 12 µs; / operation
for floating point arithmetic, min. 18 µs; / operation
cpu-blocks
number of blocks (total) dbs, fcs, fbs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used
ob
number, max. Limited only by ram for code
data areas and their retentivity
retentive data area in total (incl. Times, counters, flags), max. 2048 byte
flag
number, max. 8 kbyte; size of bit memory address area
address area
i/o address area
i/o address area, overall 1024 bytes for inputs / 1024 bytes for outputs
inputs 1024 byte
outputs 1024 byte
process image
inputs, adjustable 1 kbyte
outputs, adjustable 1 kbyte
hardware configuration
number of modules per system, max. 3 communication modules, no signal board can be used, 8 signal modules
time of day
clock
hardware clock (real-time clock) yes
deviation per day, max. +/- 60 s/month at 25 °c
backup time 240 h; typical
digital inputs
number/binary inputs 14
of which, inputs usable for technological functions 6; hsc (high speed counting)
integrated channels (di) 14
m/p-reading yes
input voltage
rated value, dc 24 v
for signal "0" 5 v dc at 1 ma.
for signal "1" 15 vdc at 2.5 ma.
input current
for signal "1", typ. 1 ma
input delay (for rated value of input voltage)
for standard inputs
parameterizable 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and 12.8 ms, selectable in groups of four
at "0" to "1", min. 0.2 ms
at "0" to "1", max. 12.8 ms
for interrupt inputs
parameterizable yes
for counter/technological functions
parameterizable single phase: 3 @ 100 khz & 3 @ 30 khz differential: 3 @ 80 khz & 3 @ 30 khz
cable length
cable length, shielded, max. 500 m; 50 m for technological functions
cable length unshielded, max. 300 m; for technological functions: no
digital outputs
number/binary outputs 10; relay; > + 60 °c number of simultaneously controllable inputs and outputs max. 50%
integrated channels (do) 10
functionality/short-circuit strength no; to be provided externally
switching capacity of the outputs
with resistive load, max. 2 a
on lamp load, max. 30 w dc; 200 w ac
output delay with resistive load
0 to "1", max. 10 ms; max.
1 to "0", max. 10 ms; max.
switching frequency
of the pulse outputs, with resistive load, max. 1 hz
relay outputs
number of relay outputs 10
number of operating cycles, max. Mechanically 10 million, at rated load voltage 100,000
cable length
cable length, shielded, max. 500 m
cable length unshielded, max. 150 m
analog inputs
integrated channels (ai) 2
number of analog inputs 2; ; > +60 °c number of simultaneously controllable inputs and outputs max. 50%
input ranges
voltage yes
input ranges (rated values), voltages
0 to +10 v yes
input resistance (0 to 10 v) ≥100k ohms
cable length
cable length, shielded, max. 100 m; twisted and shielded
analog outputs
integrated channels (ao) 0
cable length
cable length, shielded, max. 100 m; shielded, twisted wire pair
analog value creation
integrations and conversion time/ resolution per channel
resolution with overrange (bit including sign), max. 10 bit
integration time, parameterizable yes
conversion time (per channel) 625 µs
encoder
connectable encoders
2-wire sensor yes
1st interface
type of interface profinet
physics ethernet
isolated yes
automatic detection of transmission speed yes
autonegotiation yes
autocrossing yes
functionality
profinet io controller yes
communication functions
s7 communication
supported yes
as server yes
open ie communication
tcp/ip yes
iso-on-tcp (rfc1006) yes
web server
supported yes
user-defined websites yes
number of connections
overall 15; dynamically
test commissioning functions
status/control
status/control variable yes
variables inputs/outputs, memory bits, dbs, distributed i/os, timers, counters
forcing
forcing yes
integrated functions
number of counters 6
counter frequency (counter) max. 100 khz
frequency meter yes
controlled positioning yes
pid controller yes
number of alarm inputs 4
galvanic isolation
galvanic isolation digital inputs
galvanic isolation digital inputs no
between the channels, in groups of 1
galvanic isolation digital outputs
galvanic isolation digital outputs relay
between the channels no
between the channels, in groups of 2
permissible potential difference
between different circuits 500 v dc between 24 v dc and 5 v dc
emc
interference immunity against discharge of static electricity
interference immunity against discharge of static electricity acc. To iec 61000-4-2 yes
test voltage at air discharge 8 kv
test voltage at contact discharge 6 kv
interference immunity to cable-borne interference
on the supply lines acc. To iec 61000-4-4 yes
interference immunity on signal lines acc. To iec 61000-4-4 yes
surge immunity
on the supply lines acc. To iec 61000-4-5 yes
immunity against conducted interference induced by high-frequency fields
interference immunity against high-frequency radiation acc. To iec 61000-4-6 yes
emission of radio interference acc. To en 55 011
emission of radio interferences acc. To en 55 011 (limit class a) yes; group 1
emission of radio interference acc. To en 55 011 (limit class b) yes; when appropriate measures are used to ensure compliance with the limits for class b according to en 55011
ambient conditions
operating temperature
vertical installation, min. -25 °c; = tmin
vertical installation, max. 45 °c; = tmax
horizontal installation, min. -25 °c; = tmin
horizontal installation, max. 70 °c; = tmax; > +60 °c number of simultaneously controllable inputs and outputs max. 50%; no signal board can be used
vibrations
vibrations 2g panel mount, 1g din rail mount
operation, checked according to iec 60068-2-6 yes
shock test
checked according to iec 60068-2-27 yes; 15 g, 11 ms pulse, 6 shocks in each of 3 axes
extended ambient conditions
relative to ambient temperature-atmospheric pressure-installation altitude tmin .. Tmax at 1080 hpa ... 795 hpa (-1000 m ... +2000 m) // tmin ... (tmax - 10k) at 795 hpa ... 658 hpa (+2000 m ... +3500 m) // tmin ... (tmax - 20k) at 658 hpa ... 540 hpa (+3500 m ... +5000 m)
relative humidity
with condensation / maximum 100 %; relative humidity, incl. Condensation / frost permitted (no commissioning under condensation conditions)
resistance
to biologically active substances / conformity with en 60721-3-3 yes; , class 3b2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
to chemically active substances / conformity with en 60721-3-3 yes; , class 3c4 incl. Salt spray according to en 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
to mechanically active substances / conformity with en 60721-3-3 yes; , class 3s4 incl. Sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
climatic and mechanical conditions for storage and transport
climatic conditions for storage and transport
free fall
drop height, max. (in packaging) 0.3 m; five times, in dispatch package
temperature
permissible temperature range -40 °c to +70 °c
degree and class of protection
ip20 yes
standards, approvals, certificates
ce mark yes
ul approval yes
culus yes
configuration
programming
programming language
lad yes
fbd yes
scl yes
cycle time monitoring
adjustable yes
dimensions
width 110 mm
height 100 mm
depth 75 mm
weight
weight, approx. 455 g
interntechdb
characteristics will be deleted after 2012-12-31
product version
step 7 step 7 basic v10.5