Listing ID #5024597
Company Information
Ask for more detail from the seller
Contact Supplier
Technical Write-Up of Silex-50 Plain CNSL Phenolic Resin
Introduction: Silex-50 is a Plain Cashew Nut Shell Liquid based Phenolic resins and is processed using special catalyst to cater to the need of various dark & semi dark coloured quick drying paints and primers. The resins has got both air drying and baking properties and is suitable for making high gloss dark & semi dark coloured paints, primers, anti-termite chemicals and varnishes, Black offset printing inks, Insulating Varnishes of outstanding properties particularly in regard to resistance to the water and chemical.
Compatibility: Silex-50 is compatible with all Drying oils, Alkyds, Epoxies, Ester gums, Phenolics, Maleics etc., in all proportion and only to a limited extent in chlorinated resins specially chlorinated rubber. It is not compatible with urea resins.
Solubility: Silex-50 is soluble in Mineral Turpentine oil (MTO) in all proportion. It is also soluble in most of the common paints solvent like Toluene, Xylene, Naphtha’s, Ester etc., but having limited solubility in Epoxies, vinyl & ethyl ketones.
Recommended Driers: Driers such as 0.5% lead or 0.5% cobalt and 1.5% Manganese as metal on the solid resin content is recommended. If require the proportion of Manganese can be increased to further 1.0% with beneficial effects. After addition of driers ageing for 24 hours is recommended.
Mode of Supply: It is supplied in 200 kg’s packing’s as 100%, 80%, and 70% solids. For most of the paints and varnishes applications 70% execution is recommended as it has the best film properties & flowable from drums.
Application Technique: Film of Silex-50 can be applied either by brush, spray or flow technique.
Storage: The storage stability is Silex-50 is satisfactory for 6 months or more if stored in air tight containers in a cool place.
Recommended uses: Silex-50 either alone or in combination with other resins and used for formulating primers, dark coloured enamels and paints, insulating varnishes, knifing putty, Black offset Printing inks and similar other applications including special purpose anti corrosive paints baking composition etc.
Caution: Some times Silex-50 may be used along with basic pigment like Zinc Chrome,
Zinc Oxide, basic lead sulphate etc. It is advised that these pigments are not ground along
with the main pigment in the CNSL resin as there is a possibility of reaction. The reactive
pigments should be added after the grinding for proper dispersion of the Pigment. Hence it
is advisable to grind the main pigments with any Long Oil Alkyd Resin and then add our
CNSL resin outside and stir well to avoid reaction.
| Code No. | Description and Appearance | Solid Content | Viscosity@ 50% Solids B-4 cup Seconds | Hard dry with driers (30%) Solution in MT | Scratch Hardness Air Dried Gms. | Resistance to Water and Chemicals | Max. Acid Value | Suggested Applications | |
| In Air Hrs. | At 120°C Mts. | ||||||||
| 1.1 SILEX 50 | CNSL Fromaldehyde Viscous Reddish Brown Resin |
100±2% | 80 to 100 | 3.5 | 20 | 900 | Very Good | 5 | Semi Dark & Darker Enamels, Redoxide, Zinc Chrome Primers, Baking Compositions, Putty Glossy & Matty Red Oxide Paints, Anti Corrosive Black Paints, Insulating Varnishes Etc., |
| 80±2% | 100 to 120 | 3 | 20 | ||||||
| 65±2% | 120 to 180 | 2.5 | 15 | ||||||
| 1.2 SILAC V 10 | 45±2% | 180 to 250 | 2.5 | 20 | 1000 | Very Good | 5 | ||
| 1.3 SILEX 55 | Styrenated Cardphenol Formaldehyde clear golden yellow viscous liquid resin | 100±2% | 60 to 80 | 3 | 15 | 1100 | Excellent | 5 | Air drying/Baking Enamels, Insulating Varnishes, Food Cal Laquers, Chemical Resistance Paints, Wood Finishes Bobbin Paints and 100% Resin for Hammertone Finishes |
| 80±2% | 80 to 120 | 2.5 | 15 | ||||||
| 65±2% | 120 to 180 | 2.5 | 15 | ||||||
| 1.4 SILAC V 20 | 45±2% | 150 to 250 | 2 | 15 | 1100 | Excellent | 5 | ||
| 1.5 SILEX 60 | Styrenated CNSL Formaldehyde Brown Viscous Resin | 80±2% | 80 to 120 | 2.5 |
15 |
1100 | Excellent | 5 | Same as for Silex 55, Particularly recommended for dark coloured compositions and Anti Fouling Paints |
| 65±2% | 120 to 180 | 2.5 | 15 | ||||||
| 1.6 SILAC V 30 | 45±2% | 180 to 250 | 2.5 | 15 | 1100 | Excellent | 5 | ||
| 1.7 SILEX 70 | Cardphenol Formaldehyde Clear Golden Yellow Liquid Resin | 100±2% | 80 to 100 | 3.5 | 30 | 1000 | Excellent | 5 | Air drying/Banking Enamels, Dark & Semi Dark Enamels, Insulating Varnishes, Food Can Lacquers, Wood Polishes, Coatings for Anti-Corrosive Properties etc. |
| 80±2% | 100 to 120 | 3 | |||||||
| 1.8 SILAC V 50 | 65±2% | 120 to 150 | 2.5 | 20 | |||||
| 45±2% | 150 to 250 | 2.5 | 15 | ||||||
Nature of Business
Manufacturer / Exporter / Supplier
Number of Employees
20 - 50
Year of Establishment
1990
Connect with us
For Buyer 
For Seller 
Help 
