Listing ID #1273917
Company Information
Ask for more detail from the seller
Contact SupplierSilicone Rubber Sheet is made of Silicone Polymer, which are very inert, flexible, soft in touch, light weight & composite. No carbon or toxic chemicals are used in their manufacturing.
It is available in a wide range of hardness from 40° to 80° Shore A and working temperature range of -50°C to +200°C. These sheets retain their electrometric properties at high temperatures and have excellent dielectric properties. These sheets have a high resistance to ozone, oxygen and high intensity ultraviolet radiation and good resistant to oil, greases and a wide range of chemicals, acids & alkalis.
Applications :
Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) | Elongation at Break (min. %) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
---|---|---|---|---|---|---|
SI 15070S | 1.5 | 70 | 50 | 150 | 45 | -50 to +175 |
SI 15060S | 1.5 | 60 | 50 | 150 | 45 | -50 to +175 |
SI 15050S | 1.5 | 50 | 50 | 150 | 45 | -50 to +175 |
SI 15040S | 1.5 | 40 | 50 | 150 | 45 | -50 to +175 |
SI 13070P | 1.3 | 70 | 70 | 200 | 40 | -50 to +200 |
SI 13060P | 1.3 | 60 | 70 | 200 | 40 | -50 to +200 |
SI 13050P | 1.3 | 50 | 70 | 200 | 40 | -50 to +200 |
SI 13040P | 1.3 | 40 | 70 | 200 | 40 | -50 to +200 |
SI CD(Custom) | 1.30 to 1.50 | 40 to 80 | 35 to 80 | 150 to 250 | 40 to 45 | -50 to +200 |
Standard Sizes | 1) 1.2 Mtr. Wide x 10.0 Mtr. Long.2) 1.0 Mtr. Wide x 2.0 Mtr. Long. |
---|---|
Custom Size | Max. width upto 1200mm, length upto 10M and thickness from 1.5mm to 100mm available on request. |
Standard Colour | Red (Black, Blue, White & other colours available on request subject to availability.) |
Surface Finish | 1) SS - Both Side Smooth (Standard) 2) SF - One Side Smooth / Other Side Fabric Finish 3) FF - both Side Fabric Finish |
Manufacturing Tolerance | ±10% on thickness, ±5% on length, ±2% on width. |
Minimum OrderingInformation Required | • Dimension (Length x Width x Thickness) • Application/End Use • Working Temperature in °C • Tensile Strength & Elongation at Break • Hardness • Specific Gravity • Colour • Surface Finish • Total Quantity Required |
---|
The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise inwriting, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.