Small Stone Grinding Mill Machine

Small stone grinding  mill machine product introduction small stone gringding mill machineis used for grinding the barite, limestone, kaolin, ceramic, and slag, etc., below the mohs hardness of and the 280-odd sorts of  non-inflammable and non  explosive stuff in the trades of mining, metallurgical industrial, chemical engineering and building material for high fine powder generation and processing.  features 1. Higher output. Its output increases by 10%-20% comparing with raymond mill under the same power condition.2. Larger range of final fineness. Size of final product can be 0.613mm (30mesh) –0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh).3.good dust control. High pressure suspension mill meets the requirement of national dust-dump standard.4.easy to operate. The whole system is combined by some independent systems, and the cohesion between the systems is good.5. Excellent sealing. The multi-class seals are adopted to keep the grinding equipment. The working principle  firstly, raw material is crushed by jaw crusher to the required size, which is lifted up to the hopper. secondly, the raw material goes into the grinding chamber through the electro-magnetic vibrating feeder at an even rate. Thirdly, the raw material lifted by the shovel is ground into powder between the ring and roller. Fourthly, the powder is blown up to the cyclone collector through the classifier, which will be collected through the discharging valve.