Soluble Cutting Oil

We are offering Ultra 40 ( soluble cutting oil ).
description
ultra 40 is an oil in water soluble high quality cutting oil, which yields rich milky emulsion in water. Ultral 40, is manufactured from specially selected base stocks having excellent solubility characteristics. Special emulsifier is incorporated to ensure its complete dispersion in water which is moderately hard i.e upto 400 ppm. The emulsion formed is homogeneous and stable in nature, and does not split during usage or routine machine shut down periods, under normal condition.
ultra 40 , contains rust inhibitors which impart anti-rust and anti corrosive properties to the emulsion. Carefully selected biocide is incorporated to prevent bacterial growth in the emulsion.
application
ultra 40 is recommended for variety of cutting operations on ferrous and non-ferrous metals. The oil is especially suitable for metal working operations where the cooling property is more desirable compared to the lubricating characteristics. A homogeneous dispersion of oil in water can be obtained by continuous stirring either manually or mechanically while preparing the emulsion.
ultra 40 is normally used 1:20 or 1:25 parts with water for most machining operations. For grinding operations, more dilute emulsion is preferred.
performance benefits
• has superior cooling and lubricating properties, which contribute towards clean work, excellent surface finish, and minimum tool wear.
• when used as a grinding coolant, contribute towards long grinding wheel life, and minimized wheel loading.
• providing long lasting stable emulsions.
• protects work-piece, machine components and tool materials from rust and corrosion.
• enables obtain superior finish and accurate tolerances to the part machined.
performance standard & properties
[is: 1115 - 1973.]
parameter test method specification
appearance visual bright & clear
colour d 1500
sp. Gr. @ 29.5 o c d 1298 to report
k. Viscosity @ 40 oc is: 1448, p:25 24 – 28
thermal stability is: 1448, p:100 passes
copper corrosion, 100 oc (3 hrs.) is: 1448, p:15
emulsion test, 4% in
400 ppm hard water is: 1448, p:98
passes
frothing test,
5:1 and 20:1 ratio in tap water (
passes
water, percent by mass, max is:1448, p:40
ph in distilled water 8.9 – 9.1
cast iron corrosion test, 25:1 ratio emulsion
with 400 ppm hard water as (caco3)
0/1-0
the above figures are typical and do not constitute a specification. The information and data contained herein are believed to be correct. However, we do not warrant either expressly or by implication the accuracy thereof. In presenting uses for this product, no attempt has been made to investigate or discuss any patent situation, which may be involved. In pursuing constant improvements in the product the company may change the specifications at any time without notice.