Sci-tech Powder Coated Spray Dryer

Spray Dryer Model TH 042

Sci-tech Spray Dryer Model TH 042 is specially designed for practical hands-on training on spray dryer and process control study. The equipment consists of either laboratory or optionally, industrial grade instrumentation to exhibit a realistic working environment of standard industrial control loop.

It is equipped with a peristaltic pump that transfers the liquid from a container through a small diameter jet into the drying chamber. Compressed air enters the outer tube of the jet which causes the liquid to emerge as a fine atomized spray into the drying chamber. Heated air is blown through the drying chamber evaporating the liquid content of the atomized spray.

The solid particles shall be separated from the exhaust air flow by a cyclone and collected in a sample bottle. Temperatures and pressures throughout the process are indicated by temperature and pressure transmitters.

Sci-tech Spray Dryer Model TH 042  can be, optionally connected to ‘Sci-CalVaq’ SCADA system. All the process variables shall be recorded. The collected data shall be in ASCII format and it can be exported into Microsoft Excel format for reporting and further data analysis. The process variables can be monitored remotely via Internet-Of-Thing (IoT). Instructor and trainee can monitor and view the process variables in real time via the smart devices, i.e., smart phone, tablet or remote PC.

Sci-tech Spray Dryer Model TH 042 is designed for the rapid spray drying processes involving aqueous solutions, suspensions and colloids. The unit should analyze this drying method for obtaining powered products from solutions, suitable for during thermo-sensitive products. This spray dryer has been designed for educational and research laboratories and it enables to obtain the product micronized in short time, as well as valid data for scale up. The trainer consists of a heating system, drying chamber, collecting bottle, spray nozzle, peristaltic pump. The solution is sprayed into hot air inside the drying chamber using stainless steel spray nozzle. The dried products are collected in collecting bottle. The hot air temperature can be controlled using a programmable controller. All parts in contact with the product are of stainless steel and of borosilicate glass.

Detailed Operation & Maintenance Manual is provided along with the trainer.

Specifications

All the component shall be mounted on the stainless-steel platform. The unit includes the following modules and components.

1. Platform

a) Type: Desktop bench

b) Material: Stainless steel

c) Size: 0.5 (L) x 0.5 (W) m

2. Drying Chamber

a) Type & Material: Glass with gasket-free ground glass flanges

b) Equipped with a spray nozzle.

3. Feed Tank

a) Material: Stainless Steel

b) Volume: 10L

c) Equipped with level transmitter

4. Feed pump

a) Type: peristaltic pump

b) Flow capacity: @1.8 L/H with flow control

c) Pressure head: 5m

d) Power supply: 24VDC or 240VAC/1-Phase/50Hz

5. Fan/ Blower

a) Velocity: 3, 000rpm

b) Drying air through flow: 70m3/h

c) Power supply: 240VAC/1-Phase/50Hz

6. Electrical Heating element

a) Power: 3kW

b) Power supply: 240VAC/1-Ph/50Hz

7. Cyclone

a) Material: Glass or stainless teel

8. Temperature Sensors – 3 nos

a) Type: RTD Pt100

b) Measuring Range: 0 to 150 °C

9. Flow Transmitter

a) Measuring range: 0 to 2L/min

b) Output signal: 4-20mA

c) Power supply: 24VDC

10. Pressure Transmitter

a) Measuring range: 0 to 2bar

b) Output signal: 4-20mA

c) Power supply: 24VDC

11. Pressure gauge

a) Body material: Stainless steel

b) Measuring range: 0 to 2 bar

Experiment Capabilities

1. Operation principle of spray dryer.

2. The effect of flow rate, temperature and drop size on drying process.

3. Determination of the mass balance and efficiency of spray dryer.

4. Optional, Understand the INDUSTRY 4.0 TECHNOLOGY

5. Utilize the Augmented Reality (AR) to enhance the study of the subject.

6. Operate the SCADA system and remote IoT system