Listing ID #3969036
Company Information
Ask for more detail from the seller
Contact SupplierThese battery chargers are specially designed for Spray Pump Battery Charger applications taking specific requirements into consideration. These are based on SMPS technology adopting latest Pulse Width Modulation technique.
Various available ranges are as follows
Technical Specifications | 12V, 0.7A | 12V, 1.7A | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Electrical Characteristics | ||||||||||||
Input Voltage | 150 – 270V AC | 150 – 270V AC | ||||||||||
Output Voltage-Boost mode | 14.4V DC | 14.4V DC | ||||||||||
Output Voltage-Float mode | 13.8V DC | 13.8V DC | ||||||||||
Charging Current-Boost mode | 0.7A | 1.7A | ||||||||||
Leakage Current @ 230 V ac | < 2mA | < 2mA | ||||||||||
Line regulation | < 1% | < 1% | ||||||||||
Load regulation | < 1% | < 1% | ||||||||||
Ripple content | 150mV p-p | 150mV p-p | ||||||||||
Dielectric strength
|
||||||||||||
Protections | ||||||||||||
In rush current | Limited by NTC Thermistor | |||||||||||
Under voltage at Input | Cutoff at 140V AC. Cut in at 160V AC | |||||||||||
Over voltage at Input | Shut down above 300V AC | |||||||||||
Over voltage at Output | 15.5V | 15.5V | ||||||||||
Short circuit at Output | Protected | Protected | ||||||||||
Overload at Output | Protected | Protected | ||||||||||
Reverse polarity of Battery | Protected | Protected | ||||||||||
Other Features | ||||||||||||
Indications | Boost/Float mode –Dual Colour LED | |||||||||||
Mechanical | ||||||||||||
Type of mounting | Table Top Mounting Type | |||||||||||
Dimensions LxWxH | 122x54x36 | 122x54x36 | ||||||||||
Environmental | ||||||||||||
Operating Temperature | 0 – 50 Deg.C | |||||||||||
Operating Relative Humidity | 0 – 80% Max. | |||||||||||
Vibrations | 10 – 500Hz 2G-10min. / 1 Cycle 60 min. along all three axes |