SR Waterproofing Chemical, For Walls, Bricks, Tiles Blocks, Purity : 100%

Description:

• SR-Polymer is a water-dilutable water-proofing agent. It is based on the time-tested properties of acrylic polymer to give an excellent water-proofing effect to the surface. It is most commonly used for water-proofing the roof surface and the bathroom flooring and walls. 

The technology of SR-Polymer:

• SR-Polymer forms a very thin coating on the surface. This coating effectively resists water to enter the surface and makes the surface water-proof. 

Key features of SR-Polymer:

• Water resistance
• Corrosion and rust resistance 
• Wethering resistance 
• Effective in treating cracks 
• Even cures in a damp environment 
• Cost-effective 
• Solvent-free 
• Environment friendly 
• Does not changes the color of the surface

Suitable for:

• Water-proofing of mineral substrates, especially for terrace and bathroom areas. 
• Treatment of leaking cracks.

Surface preparation:

• Clean and dry the surface before application. 
• The surface should be free from grease, dirt, moss, algae, fungus, efflorescence. 
• Any excess cement residue should be scraped off the surface before application.

Application:

• Read the entire label before using 
• Test patch a surface before application. 
• Dilution: Dilute SR-Polymer in the ratio of 1:4 using water (1parts SR-Polymer in 4 parts water) 
• For surface treatment: Rollers, brushes, spray guns may be used.

Desired results after application of SR-Polymer:

• The product starts curing within few hours of application and is completely cured after 24hours of application and is ready to use

Cleaning of equipment:

• By using water with soap or detergent 

Storage:

• Best before the date mentioned on the batch. 
• In case of cream formation, brief stirring will restore the original form.

Care of product:

• Don’t keep it in direct sunlight. 
• Tight pack the container after use to maintain the product quality.

Special note:

• The aforementioned data is agreed quality of the product at the time of production and checking the quality during approval. The data are controlled at regular intervals as a part of our quality assurance program Neither these data nor the properties of product specimen shall imply any legal binding of certain properties or of fitness for a specific purpose. It is user’s responsibility to check the substrate and compatibility or suitability of the product for deemed application. For further information or for any query, Please consult your local Shrinath Chemicals representative.