Static Indoor Tank Weighing System Hscsitws

As the name suggest, a Tank weighing system is something that weights tanks. The principal is that simple. So, in theory, there is a tank, that is mounted on the Loadcells. As and when the tank is filled, the indicator will show you how much of the tank is filled, with the Litre (in case of Liquids) or Kg (in case of Powder) reading. Accordingly, the purchase can be gauged, the mixture can be prepared, or the Raw material can be ordered. However, there are some practical difficulties in building of a tank weighing system There is always a dead load on the Loadcells. Hence special types of Loadcells have to be used for the Tank weighing system. The Loadcells have to be Hermetically sealed, and have to be heat resistant. If the configuration is not done properly, the reading will always be wrong. In the worst case the tank may fall down resulting in massive loss of material and sometimes loss of life. There is constant rusting of the parts. The Loadcell, if need to be replaced, the whole tank cannot be emptied. So it has to be done in the working plant. Binding is one of the most common problems that we see in any Tank Weighing System Above are just some of the problems that have to be tackled while making a tank weighing system. Hence It is imperative that you install the system by an experienced Hindustan Scale’s Technician. 2- Who should go for a Tank Weighing System If you have the following problems, you should be thinking about installing an Hindustan Scale Company’s HSCSITWS Series. Your tank is continuously being added with materials and on the other hand, the contents are continuously being used, and you have no idea how much of material is there in the tank at any given point of time If your tank is going out of Raw Materials often If your tank overflows too often because you order too much of contents for the tank