Surfa Damp Shield Waterproof Coating

Features and Benefits

• Formulated for waterproofing protection.
• Elastomeric properties in the product ensure crack bridging ability.
• Strong adhesion to masonary substrates.
• Easy to apply and simple re-coating.

Surface Preparation

• New masonary surfaces must be allowed to cure completely.
• Ensure that the surface is thoroughly cleaned and rendered free of dust, oil, grease, grime, loose particles, algae and fungus etc. 
• Check the substrate for its soundness. Small cracks 3mm or less should be
• Opened, cleaned and filled with Surfa Crack Filler. Larger Cracks, damaged
• Portions and hollow areas must be properly repaired.

Application

• Apply a self priming coat of Surfa Damp Shield (diluted with water 31 ratio).
• Apply two perpendicular coats of Surfa Damp Shield
• without dilution.
• Achieve a forced coverage of 25 sq ft/lit/coat.
• Allow to dry for 4-6 hours between coats.

On Vertical Area

• Apply a self priming coat of Surfa Damp Shield
• (diluted with water in 31 ratio).
• Apply 1 coat of Surfa Damp Shield without dilution at the rate of 30-35 sq ft/ltr consumption.
• Apply 2 coats of Surfex Rain Shield-Exterior Emulsion Paint of the desired shade.
• Allow to dry for 4-6 hours between coats.

On Roofs/Terraces

For best performance on terraces, ensure that the product is applied on the entire roof including parapet wall to form a continuous blanket.