Low Pressure Surface Cum Edge Grinding Machine, For Automotive Industry, Packaging Type : Metal Sheet Box

₹ 1.25 Lakh / Piece

MaterialStainless Steel
UsageAutomotive Industry
TypeSurface Grinding
Grinding Length50-100mm
Supply TypeManufacturer, Supplier
Preferred Buyer Location India only

Company Information

5.0/5

Member Since 5 Years
Nature of Business Manufacturer
GST No. 03AASPM8958M1ZR

Ask for more detail from the seller

Report incorrect details

Product Details
Company Details

UsageAutomotive Industry
Grinding Length50-100mm
TypeSurface Grinding
MaterialStainless Steel
SpecialitiesExcellent Functionality, Less Maintenance
PressureLow Pressure, Medium Pressure, High Pressure
Packaging TypeMetal Sheet Box

Special Features

Most suitable for grinding knives and blades of paper cutting machines, plastic cutting machines, metal cutting shears, etc.
Electro-Magnetic 360o Swiveling Table for flat, bevel and multi surface grinding.

Machines Constructions

Machine Bed
Wedled, modular construction principle. Smooth inner area for good cooling water drainage & easy cleaning.

Guideways

Hardened and ground steel bands for main and side guides, easily exchangeable.

Electro Magnetic Table

Fixed for flat grinding with total table coverage, in Electro-Magnetic Design. Electro-Magnetic swivelling table for flat, bevel and multi surface grinding in one setting up operation, swivelling 360, multiple bearing points with large diameter journals for maximum rigidity additional clamping sides with ‘T’ slots & clamps. Electro Magnetic Table locking, by hand.

Grinding Head Carriage

Heavy Casting mounting on four reels with eight New-Departure dust proof ball bearings which act as rollers. Four reels guide the carriage in the carriage ways of the bed. The sliding base, mounted on the top of the carriage, is adjustable to feed the grinding segmental or cup-wheel to the knife. The motor base can be swiveled 10 to 25 degrees, so that the knife can be ground either straight or concave as paper knives require only 5 degrees swivel of motor base.

Down-Feed for Grinding Tool

Multiple spindle system for play and weight equalisation. Automatic Down-Feed also available.

Grinding Motors

SIEMENS OR NGEF Brand.

Grinding Head

Cylindrical type bonded to flange for light grinders, segmental heads for heavy grinding machines. For quick re-setting or changing of the segments, an easily accessible changing station is situated at the rear of the machine. To ensure vibration – free running, all grinding wheel flanges and segmental heads are fitted with adjustable balancing weights. For obtaining maximum segment use, patented segment savers can be used.

Cooling System

Water tank attached with the machine. Cooling fluid application by the electro-coolant pump.

Electrical Unit

All electrical controls are housed in the master panel board.

Technical Details

Models	Type	Width & Length Of Electro Magnet Table	Grinding Capacity	Grinding Wheel Dia	Grinding Motors (H.P)
PMS/60 Export	A	60”X6”	1550 X 150 Mm	10 “	7.5 H.P. & 1/2 H.P.
PMS/60 Export	B	60”X8”	1550 X 200 Mm	12 “	10 H.P. & 1/2 H.P.
PMS/72 Export	A	72”X6”	1850 X 150 Mm	10”	7.5 H.P. & 1/2 H.P.
PMS/72 Export	B	72”X8”	1850 X 200 Mm	12”	10 H.P. & 1 H.P.
PMS/84 Export	A	84”X8”	2150 X 200 Mm	12”	10 H.P. & 1 H.P.
PMS/84 Export	B	84”X10”	2150 X 250 Mm	14”	15 H.P. & 2 H.P.
PMS/84 Export	A	100”X8”	2550 X 200 Mm	12”	10 H.P. & 1 H.P.
PMS/100 Export	B	100”X10”	2550 X 250 Mm	14”	15 H.P. & 2 H.P.
PMS/100 Export	A	120”X8”	3100 X 200 Mm	12”	10 H.P. & 1 H.P.
PMS/120 Export	B	120″ X 10″	3100 X 250 Mm	14”	15 H.P. & 2 H.P.
PMS/120 Export	C	120″ X 12″	3100 X 400 Mm	18”	25 H.P. & 2 H.P.
PMS/120 Export	A	156″ X 8″	4000 X 200 Mm	12”	10 H.P. & 2 H.P.
PMS/156 Export	B	156″ X 10″	4000 X 250 Mm	14”	15 H.P. & 2 H.P.
PMS/156 Export	C	156″ X 12″	4000 X 300 Mm	18”	25 H.P. & 2 H.P.
PMS/156 Export	A	180″ X 10″	4600 X 250 Mm	14”	20 H.P. & 3 H.P.
PMS/180 Export	B	180″ X 10″	4600 X 300 Mm	18”	25 H.P. & 3 H.P.
PMS/180 Export	C	180″ X 14″	4600 X 350 Mm	20”	35 H.P. & 2 H.P