STIPL Stainless Steel TAPPI Hand Sheet Former, Sheet Size : 165mm Dia = 214cm2 Area

₹ 1 - ₹ 10,000 / Unit

MaterialStainless Steel
Automatic GradeSemi Automatic
Sheet Size165mm dia = 214cm2 Area
Brand NameSTIPL
Supply TypeManufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

Company Information

Member Since 2 Years
Nature of Business Manufacturer
GST No. 09AAQCS9142J1ZM

Ask for more detail from the seller

Report incorrect details

Product Details
Company Details

MaterialStainless Steel
Automatic GradeSemi Automatic
Number Of FlowerSheet Forming Machines
Country of OriginIndia
Sheet Size165mm dia = 214cm2 Area
Trimmed Size200cm2
Stock Container and dewatering vesselStainless Steel
Brand NameSTIPL
Wire Screen (Support)20 mesh
StandardisationTAPPI T 205 , ISO 5269/1 , SCAN C26
Suction Height:800 mm
Standard Accessories:Stirrer, Couch Roll, Couch Plate, . Ss Drying Disks Mirror Polished One Side, Thermosetting Plastic
UsageFor the Preparation of Laboratory Sheets of Pulp for Paper Testing .
Drainage Time3.8 ± 0.2 sec., 20 0C ± 1 0C.
Wire Screen (upper):100 mesh (ASTM std. )150 mesh (TAPPI std.)

Definition : when pulp suspension passed through a standard wire mesh fitted on a circular grid plate under standard barometric height to provide the necessary vacuum over the grid plate to form the paper sheet under uniform parameter such as consistency , temperature , water volume is defined as lab hand sheet making.

Standardization : TAPPI T 205 , ISO 5269/1 , SCAN C26

Device Description : the sheet former is intended for installation into a laboratory bench (not included). The individual stages are carried out by moving hand levers . Swirling is done with an agitator with perforated bottom plate and the couching is done with the 10kg stainless steel roller (both included in the delivery). Additionaly 10 polished mirror plates and drying rings are included in the delivery for drying . all parts are constructed of corrosion resistant materials

Test Description : by opening the hand valve the former column is half filled with water and suspensions, which has been prepared in the disintegrator , and equalizer is added . Then the former column gets filled up until the mark is reached . the agitator is used to swirl the content of the column , once the settling phase is finished , the second hand lever gets moved to open the drainage valve and the water is drained through the forming screen. The freshly formed hand sheet remains on the screen. The former column can then be opened and two blotting papers are placed on the top of wet hand sheet. With the stainless steel roller the sheet is couched and then carefully be removed from the screen and further processed with the sheet press, the drying rings or the speed dryer.