Tectyl 511 M Tectyl Rust Preventive, For IndustrialRust Proof Coating, Form : Liquid

Tectyl  Rust Preventive (Tectyl 511 M) is a solvent cutback, water displacing, and oil based corrosion preventive compound. The company shares glorious credentials with the leading Suppliers and Exporters of Tectyl  Rust Preventive (Tectyl  511 M. Our Tectyl  Rust Preventive (Tectyl  511 M) is designed to protect ferrous and non-ferrous industrial parts and transportation components during covered shipment and inside storage. It cures to a light amber colored, transparent oily film.
Surface Preparation : The maximum performance of Tectyl  511-M can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. Valvoline recommends that the metal substrate temperature be 10-35 °C at the time of product application.
Application : Tectyl  511-M is formulated to be used as supplied. Ensure uniform consistency prior to use. Continued stirring is generally not required. If the product thickens due to cold storage or loss of solvent during use, contact Valvoline. DO NOT THIN Tectyl  511-M. Incorrect thinning will affect film build, dry time and product performance. Valvoline recommends that the ambient and product temperature be 10-35 °C at the time of product application. Tectyl  511-M can be applied by airless or air mixing spray or dipping.
Caution : Adequate ventilation is required for cure and to ensure against formation of combustible liquid. THE PARTIALLY CURED FILM SHOULD NOT BE EXPOSED TO IGNITION SOURCES SUCH AS FLARES, FLAMES, SPARKS, EXCESSIVE HEAT OR TORCHES. Refer to Valvoline Material Safety Data Sheet for additional handling and first aid information.