Thermic Fluid Heaters

Horizontal Type Oil/Gas Fired Thermic Fluid Heaters.

High performance elevated temperature Hot Oil Heaters for- process heating applications at !ow operating pressure. Designed with field- proven safety features, these heaters provide round the clock, trouble-free process heating in a wide variety of industrial application. 
At high "temperature, water and steam requires a corresponding high operating pressure. Establishing this with water and steam can be very difficult and expensive. 
In thermic fluid heaters a thermal oil is wed instead as the heat carrier operating at low pressure to deliver 300ﾂｰC temperature. In comparison water and steam, would require a pressure of 85 bar to obtain this temperature. 
The SU-Series thermic fluid heaters are thermodynamically optimized and are characterized by high efficiency & excellent heat transfer to the thermic fluid. The combustion chambers are generously dimensioned & are sufficiently long. The flame can thus burn fully & the emission values remain very low for ail fuel types.
Salient Features of the SU Series - Oil/Gas Fired Thermic Fluid Heaters are

• Large heating surface area hence higher efficiency
• Hinged front door for easy cleaning and inspection
• Rugged construction
• Maximum running reliability

Advantages of using Thermic Fluid Heaters Over Steam Boilers

• High temperature up to 300ﾃつｰC at low pressure of I to 3 bar
• No equipment for pre-treatment of boiler feed wafer
• No heat loss due to hot condensate and flash steam discharge
• No risk of corrosion
• Low maintenance costs
• Easy to operate (does not require a steam boiler certified operator)

SU series heaters are compact, vertical, factory-assembled fired equipment for high temp, closed loop thermal oil process heat applications. Synthetic or mineral based thermal oils having stable properties over a wide temp range of 10 to 300ﾂｰC are used as heating medium at comparatively [ow operating pressure of 3-4 kg/ cm. 
SU series TF Heaters are fitted with indigenous pre-heated air burners in three-pass combustion system to improve thermal efficiency. These heaters are fitted with standardized components and are quite simple to operate and maintain. A large number of options, such as choice of fuel, addition of standby TF pump, sizing of de-aerator tank are available to users to meet their process needs.

Larger, more efficient 4-pass designs are manufactured in capacity range of 400,000 to 4,000,000 kcal/hr, in which the heat exchanger is split in two vertical sections; the radiant section installed above the furnace & the convection section installed next to it and connected with a refractory lined flue duct. Although, this design takes up a large floor space, it is more efficient and well planned for thermal expansion. 
The vertical design with integral furnace assures rated output on any sold fuel like coal, wood & bagasse. The well-planned design of the SU-Series ensures thermal expansion with low stress.

Salient Features of the SU Series - 4 Pass Solid Fuel Fired Thermic Fluid Heaters are

• Low operating cost
• Reliable operation
• Safety against low thermic fluid flow
• Precise thermic fluid temperature control

• Agro Industries
• Chemical & Petrochemical Industry
• Food & Beverages
• Laundry & Dry Cleaning
• Textile
• Concrete Blocks Curing
• Dairy
• Drugs & Pharmaceuticals
• Batteries
• Coir
• Engineering
• Educational Institutes
• Electric Cables
• Hotels, Hospitals
• Leather
• Paper/ Packaging/ Plywood/ Thermocole
• Research & Development
• Tea/ / Timber/ Wood/ Toys/ Wool/ Silk