Tigonis Super Power Sbr Latex

Tigonis Super Power SBR (Styrene Butadiene Rubber) latex provides good adhesion and water resistance when mixed with cement slurry/mortar/concrete/grout. It is a bonding admixture and is used to improve bond strength and chemical resistance. Reduce cracking | Increases wear resistance | Increases mortar flexural & tensile strength | Increase durability during freeze/thaw cycles | Improves bond strengths to hardened concrete | Greater surface coverage & easy to use. Description SURFACE PREPARATION If using this product as a cementitious bond coat, the base concrete must be a minimum of 3 days old. The concrete must be clean and all oil, dirt, debris, paint, curing compounds, sealers and unsound concrete must be removed. The surface must be prepared mechanically using a scabbler, bush hammer, shot blaster or scarifier, so that the minimum surface profile is 3 mm and exposes the large aggregate of the concrete. USES ► Waterproofing of roof slabs/columns/sunshades/sunken slabs, basements/water tanks/waterproofing of bathroom, toilet/terraces, etc. in combination with cement. ► Increased bonding agent for uses in crack repair and plastering. ► Treatment for leaching and saltpetre action. ► Excellent coverage, economic – approx 60-80 sq ft per kg/two coats (mix 1:4:7 – TSPLA: Water: Cement) TSPLA can be diluted with water (1:4-6) depending on the type of application.