Tigonis Tigoguard 2K Acrylic Waterproofing Coating

Tigonis Tigoguard 2K Acrylic Waterproofing Coating is an acrylic cementitious, polymer modified elastomeric, waterproofing & protective coating .This is composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates. When the acrylic-modified emulsion is applied according to direction, the cured coating become a tough, flexible and seamless waterproof membrane and acts as an excellent water barrier to Concrete and Masonry Surface. Description Application areas Tigonis Tigoguard 2K Acrylic Waterproofing Coating must be applied to new or old concrete substrates Waterproof coating for bathrooms, kitchen sinks, balconies, etc. Excellent as a coating for waterproofing of chhajjas, canopies, etc. Good for waterproof coating on internal sides of domestic water tanks. Waterproofing of sloped roofs. Waterproof coating for terraces areas ( 100 – 150 sqm ) Features & Benefits Easy to apply by brush Flexible and bridges cracks in concrete surfaces. Elastomeric flexible coating Provides a waterproof surface & eliminate water leakage. UV Resistance Non-Toxic Surface Preparation Surface must be clean and dry to ensure adequate adhesion. Surface must free from oil, grease, dust, loose particles and other foreign material. Cracks and voids must be filled with an appropriate Crack Filler. Any defects on surface should be repaired prior to application of membrane. Cracks due to shrinkage should be repaired with polymer modified mortar. Mixing Shake the liquid well before mixing. Add the power into the liquid portion and mix it slowly with slow speed mechanical stirrer. Continue to stir thoroughly to achieve lump free homogenous slurry. Allow the mixture to stand for 5-10 mins to release the trapped air