Tile Grout (High Polymer)

We are acknowledged Manufacturer and Supplier of Antique Tile Grout Golden (High Polymer) from Surat, Gujarat. Our Antique Tile Grout is a high polymers powder composed of Portland cement. Golden Antique Tile Grout, offered by us, is widely demanded due to its water resistance, high bonding strength and soft consistency. Our Water Resistant Tile Grout is non-toxic and non-shrinking and widely used for sealing of swimming pools & water tank joints.

Description : Antique Tile Grout Golden is a High Polymer based fine powder consisting of portland cement, specially selected polymer, properly selected & graded fine fillers, additives and inorganic chemicals. It is used for grouting of tiles, stones, marble joints & edges because it has water repellency properties, excellent adhesion (high bonding strength), soft consistency, workability and seals joint permanently. It is nonshrinking, non-toxic and odourless grout used for sealing of swimming pool & water tank joints as well.
Areas of Application :

• Antique Tile Grout Golden is used for grouting of ceramic tiles, marbles, natural stones and edges.
• Specially formulated for wet or submerged grouting applications such as swimming pool, bathrooms, toilets, fountains and kitchen areas.
• It can be used for external and internal areas.
• It is used in residential and commercial areas.
• Application up to joint width of 2-10mm.
• It is excellent for highly glazed tiles to give a smooth and watertight joints which when set will be both water and mould resistant.

Features & Benefits :

• Aesthetics – Available in specify shades.
• Easy to use – Easily to mix with water and forms soft consistency paste which is easy to fill the joints.
• Shrinkage & cracking - Avoids cracks formation in the joints and also there is negligible shrinkage.
• Service Temperature - Specially formulated for temperature range of 50– 1500C.
•  Water resistant – Excellent water-resistance making it beneficial for application in areas immersed under water.
•  Durability & UV resistant - Excellent UV resistance & durability enables the product use for exterior application.
•  High Strength & abrasion resistant – High strength & abrasion resistance properties makes it suitable for grouting of toilets & bathrooms.

Method of Application :

• Surface Preparation :
  
  •  Surface must be cleaned and should be free from dirt, cured tile adhesive. Remove dust with wire brush & by air blower.
  •  For exterior grouting application, wet the tiles prior to applying Antique Tile Grout Golden

• Mixing :
  
  •  Add the grout powder to the mixing water (w:p ratio – 1 : 2.5 by volume) and mix with slow speed drill (250-300 rpm) to a soft & smooth consistency paste.
  •  If the grout mortar has become too stiff to work, it should be discarded and a new batch should be prepared.

• Application : Apply to the tile joints with squeegee, spatula or putty blade. After application flush the surface of tile using a hard rubber float, working diagonally across the grout joints to fill and compact the joints. All excess grout
  should be removed with the same rubber float without any delay. Lesser the quantity of grout left on the face of the tiles while application, the final cleaning will be easier with Antique Tiles & Grout Cleaner - 225. However, it is important to allow the grout to set in the joint and to let it acquire its initial set before any further cleaning. After the initial set of the grout, clean the tile surface with a pad of cheesecloth or towel dampened with minimum quantity of clean and cool water. Rub in a circular motion to further compact the grout. The remaining surface grout on the tile can also be cleaned at this time. Scrubbing pad fastened to a float works very well to remove grout from the porous tiles. Rebuff the tile surface and grout within 1-2 hours to remove all weep water and grout residue from the surface, which helps to reduce the efflorescence and to control colour variation.

• Cleaning :
  
  • Polish the tiles when the job is complete with a clean dry cloth. Scrubbing the floor with hot water and soap water is the best.
  • Due to polymer content, it is advisable to clean the surface immediately after the grouting.

Precautions & Limitations :

• Do not mix excess water.
• Antique Tile Grout Golden cannot be used where high acid resistance is required because of its cement base.
• The potential for efflorescence is inherent in all cement-based products and it is not to be considered as a manufacturing defect.

 
The water Absorption test results complies with the ANSI 118.6 specification limit
Coverage :

• Refer Table for the consumption of Antique Tile Grout Golden for various sizes of tiles
• Pls. Add 5 % wastage in TG consumption mentioned above.

Packaging - 500gm, 1kg & 20kg.
Shelf Life & Storage :

• -Shelf life is 12 months from the date of manufacturing in unopened condition.
• -Store in a cool & dry place.

Health & Safety Precautions :

• Protective clothing, such as gloves and goggles, should be worn.
• Treat any contact to the skin or eyes with fresh water immediately.
• Do not induce vomiting & seek medical
• Assistance immediately.
• Reseal pack after use and ensure product is stored as instructed..