Titanium Weave Wire Mesh

We are offering titanium weave wire mesh.
Titanium weave wire mesh
*1>material: gr1,gr2,gr3,gr4,gr5
*2>width:wire dia.:0.03-0.6mm
*4>titanium mesh:2-250mesh
table 1
grade tensile strength
(min) yield strength 0.2%offset elongation in 2in. Or 50mm % (min) bend test
min max under0.070in
(1.8mm)in thickness 0.070 to 0.187in
(1.8-4.75mm)
in thickness
ksi mpa ksi mpa ksi mpa
gr.1 35 240 25 170 45 310 24 3t 4t
gr.2 50 345 40 275 65 450 20 4t 5t
gr.3 65 450 55 380 80 550 18 4t 5t
gr.5 130 895 120 828 -- -- 10 9t 10t
gr.7 50 345 40 275 65 450 20 4t 5t
gr.9 90 620 70 483 -- -- 15 5t 6t
gr.12 70 483 50 345 -- -- 18 4t 5t
table 2
name spec. Mm standard
titanium mesh plate
1x12.5x4.5-(14x40) qbs5932-91
astm f67
astm b265
1.2x12.5x4.5-(14x40)
1.5x12.5x4.5-(14x40)
table 3
material specifications
mm state room-temperature mechanical,no less than ,%
3.2~6.35
σb
mpa(ksi) σ0.2
mpa(ksi) δ
% ψ
%
gr1
annealing
(m) 240 170 24 30
gr2 345 275 20 30
gr3 450 380 18 30
gr4 550 483 15 25
gr1
1.6~3.2 240 170 15 ~
gr2 345 275 12 ~
gr3 450 330 10 ~
gr4 550 483 8 ~
gr1
1.0~1.6 240 ~ 12 ~
gr2 345 ~ 10 ~
gr3 450 ~ 8 ~
gr4 550 ~ 8 ~
table 4
material impurities content not more than ,%
ti fe c n h o residual elements
single total
gr1 allowance 0.20 0.08 0.03 0.010 0.18 0.10 0.40
gr2 allowance 0.30 0.08 0.03 0.010 0.25 0.10 0.40
gr3 allowance 0.30 0.08 0.05 0.010 0.35 0.10 0.40
gr4 allowance 0.50 0.08 0.05 0.010 0.40 0.10 0.40
titanium platesheet-------punching--------pulling------anneal(leveling)-----acid-washing