Uninterrupted Power Supply System

Phase Dispacement120±1 deg for 100% unbalanced load
Harmonic Distortion<3% THD for linear load , <5% THD for non-linear load
Output Rating1/2/3/7.5/15/20 KVA, Single Phase 10/20/30/40/50/60/75/100/120/150/200/250/300/400/500 KVA, 3 Phase
Wave FormSine Wave
Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

Company Information

5.0/5

(1)

Ask for more detail from the seller

Report incorrect details

Output Frequency50Hz±0.1%
Crest Factor3:1
Response TimeRecover to ±1% within 5msec
Power Factor0.8
Output Voltage220/230/240 Single Phase 380/400/415 V, 3 Φ
Phase Dispacement120±1 deg for 100% unbalanced load
Input Voltage230 VAC, (+15%-20%)Single Phase 415 Volts (+15%-20%) 3 Phase 4 wire
Output Regulation±1% for unbalanced load
Harmonic Distortion<3% THD for linear load , <5% THD for non-linear load
Over Load110% for 30 minutes, 125% for 10 minutes , 150% for 60 seconds
Wave FormSine Wave
Input Frequency47 to 53 Hz
Transient Response±5% for 100% step load change
Output Rating1/2/3/7.5/15/20 KVA, Single Phase 10/20/30/40/50/60/75/100/120/150/200/250/300/400/500 KVA, 3 Phase

Features :

Efficiency	Inverter Efficiency Overall Efficiency	Better than 95% Better than 92%
Protection	Rectifier	I/P AC over/under voltage DC over voltage Battery charging over current Single phase failure Reverse phase sequence
	Inverter	O/P over voltage O/P overload O/P short circuit DC under voltage Over temperature
Metering	LCD / LED display to read following parameters with user friendly mimic diagram: I/P Voltage, O/P Voltage, Battery Voltage, I/P Current, O/P Current, Battery Charge, I/P Frequency, O/P Frequency
Controls	Input On/Off MCB/MCCB, By - Pass on/off switch, Output on/off switch, Manual by - pass switch, Inverters on/off
Physical	Enclosure Cable Entry Colour	IP 31 (IP 42-optional) Bottom (top-optional) Broken White/Siemens Grey (optional as per req.)
Enviornment	0 to 45° C max, upto 95% RH (non - condesing)
	Cooling Audible Noise Altitude	Forced air-cooling <60dB upto 100KVA <75dB upto 500KVA <300 mtr. above MSL
Refference Standards	IEC 146-(IV), EN 50091-1, EN 50091-2
Optional Features	Remote Start-Stop, RS 232/485 interface CNC machine interlock