Universal Plaster

The organization is established as Universal Plaster Manufacturer and Supplier in Delhi, India. The Tivisha Universal Plaster, offered by us, is a premixed single application plaster made from calcium sulphate hemihydrates. In the making of Universal Plaster, we use high grade additives that ensure high performance & workability. Our Universal Plaster is available in different varieties. Besides, we offer Universal Plaster at highly competitive prices to the clients.
Range of Universal Plaster

• Stucco plaster
• Veneer Plaster
• Jointing compound
• Tile Adhesive
• Cornic Adhesive
• Universal
• Universal Fine
• Universal Super Fine

• Premixed lightweight plaster
• Easy Workability: Easy to mix – Easy to apply
• Less water consumption – 15 liter water required for 25 kg plaster, water curing is not required.
• Free from inherent shrinkage cracks
• Classified as non combustible (BS: 476 part 4:1970)
• Low Thermal Conductivity – (Thermal Resistance R = 0.07 m2 k/w, 13mm thickness)
• Low Density
• Light Weight – Better Strength to weight ratio as compared to density
• Achieves total strength within 48 hours on complete drying (Quick drying)
• Better sound absorption

• The consumption of Gypsum plaster is directly related to the line & level of the walls in the building, which is variable factor, it also depends upon the basic wall base material i.e. Bricks/Blocks.
• Based on field trials & experience, the consumption pattern of Gypsum Plaster varies between 1.5 Kg. For 13mm, plaster thickness and up to 2.00 kg in a right angle finish on the walls.
• It is advisable to do a mock up of a entire flat in your building to ascertain the actual consumption pattern of Gypsum plaster.

• Fitting & Plugging should be done before plastering. Opening, chasing etc. (for fittings or conduits) should be filled firmly before starting plastering
• Entire background (to be plastered) should be thoroughly brushed & cleaned to remove dust, loose, mortar & oil/grease.
• The surface should be reasonably dry & protected from weather conditions. The high suction background should be adjusted by sprinkling water.
• Always mix powder to water, not water to powder. Material should be thoroughly mixed & stirred as to insure it is free from lumps and impurities before use.
• Once plaster wet mix is made & has started to do set, it should not be tempered with fresh mix or powder, as it will affect the properties.
• Due care should be taken to ensure that rapid loss of water is avoided, in hot & dry condition.
• Tools & water used should be cleaned & free from impurities
• To ensure that hands are dry before putting them in the bag. After taking our plaster, always fold open end of bag, to protect plaster from moisture.
• Bags should be handled carefully to avoid tearing. Hooks are not recommended.