Universal Tile Fixing Adhesive

Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

UTA (Universal Tile Fixing Adhesive) Product Decription: "MYMIX – UTA (Universal Tile Fixing Adhesive)" is a Cementitious ready mix which is a thin bed polymer modified tile adhesivefor....

View More Details

Send Enquiry

Company Information

Sanghavi Group

Makarba, Ahmedabad, Gujarat

View Number

Member Since 7 Years
Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Report incorrect details

View Company Details

Product Details
Company Details

UTA (Universal Tile Fixing Adhesive) Product Decription:

"MYMIX – UTA (Universal Tile Fixing Adhesive)" is a Cementitious ready mix which is a thin bed polymer modified tile adhesive
for interior and exterior application. Its unique properties make it ideal for fixing ceramic tiles, vitrified tiles, natural stones and granite to most building substrates

Application:

Specially for interior & exterior floors and walls installations
All types of tiles and stone

Enquiry

Advantages:

Easy to Apply, Single component adhesive
More open time
Dual purpose for floor and wall with good adhesion workability

Suitable Substrates:

Concrete wall and floor area
Brick Masonry
Cement mortar beds

High Shear Bond Strength
Superior adhesion for porcelain and vitrified tiles

Tile‐on‐tile application
Cement Plaster
Thin-set Cementitious Screeds

Packing:

25 kg bag and Project packing of 40 kg bag is available on demand

Colour:

Available in Grey & White

Shelf Life:

Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area

How to apply:

Add 25 kg of “MYMIX‐UTA (Universal Tile Fixing Adhesive)” to approx. 6.5 to 7.5 liters Of cool and clean tap water and stir properly for 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture
After stirring wait for 10 minutes, stir once again and apply the adhesive on the subfloor with the recommended adhesive notch trowel
Press the tiles within 15 to 20 minutes with a shuffling movement onto the adhesive. Check regularly to ensure that the back of the tile is in full contact with the adhesive. Remove excess adhesive immediately from the joints
The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish. The surface should be flat with a tolerance of 4mm over a distance of 2 meters. It is essential to waterproof wet areas prior to tiling.
New concrete is recommended to be 1 month old for every 25mm thickness and completely dried before tiling
Under normal circumstances, i.e. a temperature of 20°C and a relative humidity of 65%, the joints may be
filled after minimum 24 hours

Technical Detail: (As per IS 15477 & ANSI 118.4)

S.No	Testing Parameter	Specification
1	UTA – Mixing Ratio	6.5 to 7.5 Liter water for 25 kg Material Approx: 25–30% by weight
2	Product Colour	Grey
3	Workability	Easy mixing and Self curing
4	Application	Easy application
5	Open Time @ 23–270c	30 – 45 minutes
6	Pot Life	4 hours
7	Setting Time	24 hours
8	Trafficable Time	24 hours
9	Coverage for 3 mm bed thickness	65 – 75 Sq – Ft / per 25 kg bag
10	Shear Adhesion:
A	Dry Condition after 24 hrs	4.6 KN
B	Dry Condition after 14 days	20.50 KN
C	Heat Ageing Condition	14.60 KN
D	Wet Condition	13.50 KN
11	Tensile Adhesion
A	Dry Condition	2150 N
B	Wet Condition	2000 N