General description
compact and lightweight for ease of use on-board, the uwi-320 tp welding inverter offers excellent performance-to-weight ratio
designed for operator safety * voltage reduction function (vrd) ensures that maximum touchable voltage the stick electrode welder can be exposed to is 8v
designed for durability
* its design utilises an active fan control, which reduces the amount of dust and dirt inside the machine, thereby reducing the risk of short circuiting and increasing efficiency and life time.
* the unique tp (total protection) function effectively prevents damage to the machine in case one phase in the primary power supply fails. * thermal overload protection prevents damage due to overload.
easy and efficient tig welding function
* lift-start in tig mode provides easy and soft arc start. * with the use of remote control the welder has full control of arc and heat input during welding, and at finish he has full control of down-slope and arc stop.
for all coated welding electrodes
* with up to 320a output it provides full capacity for welding all coated electrodes including most 6mm high recovery electrodes.
Parallel connection * parallel connection of two machines provides 640a output for the few coated electrodes that require more than 320a, and full air carbon arc gouging capacity.
Technical data
welding current range
10-320a
open circuit voltage
9v
duty cycle at max current
30%
power supply
380-440v 3 phase 5060hz
recommended fuses
20-16a
ip protection
23 s
weight
18kg
length
460mm
width
230mm
height
325mm
accessories
documentation
product number
product name
stick welding accessories
670406
accessories kit fuwi-320,-400,-500
the kit consists of :
flipvision welding shield and welding gloves,
electrode holder, return clamp and remote control all with 3m cables and connectors,
chipping hammer and wire brush
tig welding accessories
200000
tig torch t-200 w.dix 70 connector
607810
tig torch accessories kit
510010
regulator 510 arco2 flow 0-35lmin
619379
manometergauge guard +
597310
flowcontrol valve, argon
597328
flowcontrol meter, argon
argon shielding gas
905565
argon e-10 filling
905174
argon e-50 filling
cable and gas hose extensions
670422
remote controlcable for uwi-320500
175844
welding cable 50 mm2
632893
cable connector dix70 male-female
576157
gas hose 14" 6.3mm black
729442
hose clamp for 14" hose (10 pcs
175596
hose joint f6mm (14 inch) ox hose
768507
pincer tool for ear type hoseclamps
parallel connection of two uwi-320 machines. Note: should be done at the work site when cable extensions are used.
676973
remote control parallel connection
632901
triple connection dix-70 mmf, 2 pcs
air carbon arc gouging accessories
528703
air carbon arc torch 600a
634121
conversion assem. 2 pcs

General description
compact and lightweight for ease of use on-board, the uwi-320 tp welding inverter offers excellent performance-to-weight ratio
designed for operator safety * voltage reduction function (vrd) ensures that maximum touchable voltage the stick electrode welder can be exposed to is 8v
designed for durability
* its design utilises an active fan control, which reduces the amount of dust and dirt inside the machine, thereby reducing the risk of short circuiting and increasing efficiency and life time.
* the unique tp (total protection) function effectively prevents damage to the machine in case one phase in the primary power supply fails. * thermal overload protection prevents damage due to overload.
easy and efficient tig welding function
* lift-start in tig mode provides easy and soft arc start. * with the use of remote control the welder has full control of arc and heat input during welding, and at finish he has full control of down-slope and arc stop.
for all coated welding electrodes
* with up to 320a output it provides full capacity for welding all coated electrodes including most 6mm high recovery electrodes.
Parallel connection * parallel connection of two machines provides 640a output for the few coated electrodes that require more than 320a, and full air carbon arc gouging capacity.
Technical data
welding current range
10-320a
open circuit voltage
9v
duty cycle at max current
30%
power supply
380-440v 3 phase 5060hz
recommended fuses
20-16a
ip protection
23 s
weight
18kg
length
460mm
width
230mm
height
325mm
accessories
documentation
product number
product name
stick welding accessories
670406
accessories kit fuwi-320,-400,-500
the kit consists of :
flipvision welding shield and welding gloves,
electrode holder, return clamp and remote control all with 3m cables and connectors,
chipping hammer and wire brush
tig welding accessories
200000
tig torch t-200 w.dix 70 connector
607810
tig torch accessories kit
510010
regulator 510 arco2 flow 0-35lmin
619379
manometergauge guard +
597310
flowcontrol valve, argon
597328
flowcontrol meter, argon
argon shielding gas
905565
argon e-10 filling
905174
argon e-50 filling
cable and gas hose extensions
670422
remote controlcable for uwi-320500
175844
welding cable 50 mm2
632893
cable connector dix70 male-female
576157
gas hose 14" 6.3mm black
729442
hose clamp for 14" hose (10 pcs
175596
hose joint f6mm (14 inch) ox hose
768507
pincer tool for ear type hoseclamps
parallel connection of two uwi-320 machines. Note: should be done at the work site when cable extensions are used.
676973
remote control parallel connection
632901
triple connection dix-70 mmf, 2 pcs
air carbon arc gouging accessories
528703
air carbon arc torch 600a
634121
conversion assem. 2 pcs