VLT Automation AC Drive (FC 300)

Listing ID #1822791

Keeping up with the latest trends, we strive to achieve utmost customer satisfaction. We, as a Supplier of VLT Automation AC Drive (FC 300), deliver immaculate quality to our customers. The raw material used in the manufacturing is of high-grade quality. Our vendors assure us in terms of meeting the standards of quality set by industry. For our valued customers, we make quick delivery at their doorstep.
Additional Information :
The VLT® AutomationDrive is a single drive concept that covers the entire range of application, which is a major benefit in commissioning, operating and maintaining the equipment. The VLT® AutomationDrive series offer an intelligent plug-and-play technology and unmatched reliability making drive operation pure childs play.
Product Range :

• 0.25 - 37 kW (200 - 240 V)
• 0.37 - 800 kW (380 - 500 V)
• 0.75 - 75 KW (525 - 600V)
• 1.1 kW – 1.4 MW (525 - 690V)

Features & Benefits :

• Enclosures : The drive meets requirements for enclosure class IP 20/Chassis. Optional IP21/NEMA 1, IP55/NEMA 12, IP 54/NEMA12 or IP66 NEMA 4X.

• Smart logic controller : The VLT® AutomationDrive features logic control functions and a sequence control based on events and actions.

• Safety : The drive is delivered as standard with the Safe Torque Off (Safe Stop) function in compliance with EN ISO 13849-1 Category 3 PL d and SIL 2 according to IEC 61508 low demand and high demand mode. The safety functions can be extended to include SS1, SLS, SMS, SSM, safe jog mode etc. with the VLT Safe Option MCB140 Series and VLT Safe Option MCB150 Series.

• Hot pluggable LCP : The Local Control Panel (LCP) can be plugged in or out during operation. Settings are easily transferred via the control panel from one drive to another or from a PC with set-up software.

• Intelligent heat management : Cooling can take place in two ways to offer different sets of benefits. Forced convection cooling: A fan blows cold air through the cooling ribs of the aluminium base to remove heat. The channel is easily cleaned without touching electronics. Cold plate cooling: External cooling is possible through the back side of the aluminium base. Panel through mounting: Electronics inside cabinet - power heat sink outside cabinet. Duct cooling: Air from the control room – or from outside – cools the heat sink without contact to the electronics.

• Accessories : For the VLT® AutomationDrive FC 302 a wide selection of accessories is available to suit your needs. For further details see Operation Instruction.

• Options : Options for bus communication, synchronisation, user programs, etc., are delivered ready to plug-and-play.

• Display options
  
  • Graphical Local Control Panel(LCP 102)
  • Numerical Local Control Panel (LCP 101)
  • LCP Panel Mounting Kit
  • Blind Cover
  • Application option
  • 24V input option for control voltage.

• Fieldbus options
  
  • PROFIBUS DP V1 (MCA 101)
  • DeviceNet (MCA 104)
  • CAN Open (MCA 105)
  • PROFINET (MCA 120)
  • EtherNet IP (MCA 121)
  • Modbus TCP (MCA 122)
  • POWERLINK (MCA 123)
  • Ether CAT (MCA 124)

• I/O options
  
  • General Purpose I/O (MCB 101)
  • Encoder Input (MCB 102)
  • Resolver Input (MCB 103)
  • Relay Option (MCB 105)
  • Safe PLC I/O (MCB 108)
  • PTC Thermistor Card (MCB 112)
  • Ext. Relay Card (MCB 113)
  • VLT Sensor Input (MCB 114) 

• Motion control options
  
  • Motion Control (MCO 305)
  • Synchronizing Control (MCO 350)
  • Positioning Control (MCO 351)
  • Center Winder (MCO 352)

• Brake Resistors : Fittings and frames for mounting more resistors together

• Power Options
  
  • Advanced Harmonic Filter (AHF 005/010 MCE)
  • Sine-Wave Filters (MCC 101)
  • dU/dt filter (MCC 102)

• Other accessories
  
  • IP21/NEMA 1 Kit
  • Profibus Adaptor
  • Sub-D9 Connector
  • Decoupling Plate for Fieldbus Cables USB Connection cable to PC