vitcon 2011 polykote is a multifunctional acrylic polymer emulsion for enhancing properties of concrete, mortar and grout through better bonding, waterproofing and improvement in several other properties. vitcon 2011 polykote is used for permanently bonding plaster to ensure finish of exterior walls, bonding new concrete to damp / dry concrete, making mortar for repairing and for waterproofing.
technical data:

• appearance free flowing white liquid dries off to colourless
• specific gravity 1.02 ± 0.02
• solid content 36 ± 2
• uv resistant excellent
• bond strength (kg/cm2 ) 8.0 - 8.5

usage:

• repair mortar for precast structural concrete members, toppings, patches and cracks.
• toilet, sunken slabs, swimming pools, water tank, sewers, channels, aquariums and terrariums.
• foundations, repairing walls, planters and concrete terraces, sealing and repair of asbestos panels, pipes and surfaces.
• durable and aesthetic exterior finish with cement paint.
• joining old concrete to new concrete.

advantages:

• easy to use and excellent uv resistant.
• improves bond strength, facilitating tough and hard wearing surfaces.
• allows trapped vapour to escape thus preventing peeling / blistering.
• reduces cracking through increased mortar flexural strength.
• increases mortar tensile strength.
• increases mortar wear resistance under rubber wheeled traffic.

application methodology:
surface preparation:

• ensure that structure is at least 3 days old, sound and free from the dirt, soil, oil release agents, laitance and any other foreign materials which may impair the bond, penetration and overall performance of vitcon 2011 polykote. do not etch with acid.
• allow concrete surface to dry. do not place slurry coat on standing water.
• remove chemically any efflorescence, form oil, mould etc.
• ensure to fill cracks / honeycombs / holes/ faulty construction joints with mortar made of vitcon 2011 polykote, cement and super fine sand in the ratio of 1 : 2 : 3 and allow it to touch dry.
• pre-wet / dampen all prepared concrete surface before application of vitcon 2011 polkote. surface must be damp during application. do not allow standing water.

vitcon 2011 polykote is a multifunctional acrylic polymer emulsion for enhancing properties of concrete, mortar and grout through better bonding, waterproofing and improvement in several other properties. vitcon 2011 polykote is used for permanently bonding plaster to ensure finish of exterior walls, bonding new concrete to damp / dry concrete, making mortar for repairing and for waterproofing.
technical data:

• appearance free flowing white liquid dries off to colourless
• specific gravity 1.02 ± 0.02
• solid content 36 ± 2
• uv resistant excellent
• bond strength (kg/cm2 ) 8.0 - 8.5

usage:

• repair mortar for precast structural concrete members, toppings, patches and cracks.
• toilet, sunken slabs, swimming pools, water tank, sewers, channels, aquariums and terrariums.
• foundations, repairing walls, planters and concrete terraces, sealing and repair of asbestos panels, pipes and surfaces.
• durable and aesthetic exterior finish with cement paint.
• joining old concrete to new concrete.

advantages:

• easy to use and excellent uv resistant.
• improves bond strength, facilitating tough and hard wearing surfaces.
• allows trapped vapour to escape thus preventing peeling / blistering.
• reduces cracking through increased mortar flexural strength.
• increases mortar tensile strength.
• increases mortar wear resistance under rubber wheeled traffic.

application methodology:
surface preparation:

• ensure that structure is at least 3 days old, sound and free from the dirt, soil, oil release agents, laitance and any other foreign materials which may impair the bond, penetration and overall performance of vitcon 2011 polykote. do not etch with acid.
• allow concrete surface to dry. do not place slurry coat on standing water.
• remove chemically any efflorescence, form oil, mould etc.
• ensure to fill cracks / honeycombs / holes/ faulty construction joints with mortar made of vitcon 2011 polykote, cement and super fine sand in the ratio of 1 : 2 : 3 and allow it to touch dry.
• pre-wet / dampen all prepared concrete surface before application of vitcon 2011 polkote. surface must be damp during application. do not allow standing water.